Overview
The Dana Spicer 2004431 is a 24-spline companion flange yoke for the rear end of a Dana Super 44 axle. It has 10 holes on a 3.35-inch bolt circle diameter and a 1.77-inch pilot diameter, and it is a direct fit for 2007–2017 Jeep Wrangler (JK) models.
The bolt pattern and pilot diameter decide whether the flange lines up with the mating yoke, so check those two figures first.
Key features
- 24 splines
- 10 bolt holes
- 3.35-inch bolt circle diameter
- 1.77-inch pilot diameter
- Rear end application
Checking the flange before install
A companion flange connects the driveshaft to the pinion, so its condition affects vibration and seal life. Before fitting, look at the splines, the bolt holes and the sealing surface. Worn or rounded splines, cracked holes or grooves in the seal area are reasons to replace the flange.
Fit is judged mostly by the bolt pattern, the pilot and the spline count. The pilot should slide in without binding, and the holes should line up with the yoke. Count the splines on the mating part and confirm the flange matches before the nut is tightened.
Runout and balance matter for smooth driveline operation. Mount the flange square to the pinion and check for any wobble after assembly. Recheck the pinion nut after the first few drives.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 2004431 |
| Position | Rear end |
| Application | Dana Super 44 |
| Splines | 24 |
| Bolt holes | 10 |
| Bolt circle diameter | 3.35 inches |
| Pilot diameter | 1.77 inches |
| Fitment | Direct fit |
Vehicle fitment
It fits 2007–2017 Jeep Wrangler (JK) models.
The list does not include the TJ, LJ or JL Wranglers. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One 24-spline companion flange yoke.












