Overview
The Crown Automotive J5361674 is a black rubber sway bar bushing with a .875 in inner diameter. It is a factory style replacement part, and two bushings are required per link.
Sway bar bushing wear and replacement
Sway bar bushings hold the bar to the frame and let it rotate as the body leans in turns. Rubber bushings can dry-rot, crack or flatten over time, which allows the bar to move in its mounts and produce clunks or squeaks over bumps. Look for cracking on the outside face and check whether the bushing sleeve has slipped.
Replacement bushings should be installed with the correct orientation and a suitable lubricant. Petroleum-based grease can break down rubber, so use a silicone or water-based lube if you need one. Bushings are commonly replaced in pairs on the same bar, and worn end links are often replaced at the same time because they carry the same movement. Tighten the bracket bolts with the vehicle at ride height so the bushings are not preloaded.
- Look for cracks on the outer face
- Check bushings and end links together
- Use a lubricant safe for rubber
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5361674 |
| UPC | 848399064728 |
| Material | Rubber |
| Color | Black |
| Inner diameter | .875 in |
| Bushings per link | 2 required |
Vehicle fitment
Compare the .875 in inner diameter with your sway bar and links before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Two bushings are needed per link, so count the link positions before starting.
What’s included
Two per link are required. Confirm the piece count in the package against the number of link positions on your vehicle.









