Overview
The Currie CE-9807CA is a complete set of 8 Johnny Joint control arms for the 2007–2018 Jeep Wrangler JK, covering the front and rear, upper and lower positions. The set fits 2 and 4-door models, and the arms are fully adjustable so the pinion angle can be set after a lift is installed.
The arms are made from heavy tubular steel using 1 1/4 in. heavy wall D.O.M. tubing, with Johnny Joints on both ends. The set covers many Wrangler JK trims, from the Sport and Sahara to the Rubicon and the Unlimited models.
Key features
- Complete set of 8 control arms
- Johnny Joint ends on each arm
- Fully adjustable to set pinion angle after a lift
- Heavy tubular steel construction
Pinion angle after a lift
Control arms locate the axle and carry braking and driving loads, so their length and angle decide where the pinion points. When a lift changes the axle’s position, the arms have to be adjusted to restore a correct pinion angle. Adjustable arms make that possible, but each arm changes the geometry, so the work should be done as a set.
Before setting angles, check that the frame mounts and axle brackets are sound and that the Johnny Joint ends have no play. Use a level or a driveline angle gauge to measure, and recheck after the first few drives since the joints settle. Look for vibration, clicking at the ends or uneven tire wear, which can point to angles that need another look. Keep the fasteners tight and inspect the joints regularly on rough trails.
- Check frame and axle mounts first
- Measure driveline angles after each adjustment
- Recheck joints after the first drives
- Inspect Johnny Joint ends for play
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9807CA |
| Position | Front and rear, upper and lower |
| Quantity | 8 control arms |
| Construction | Heavy tubular steel |
| Tubing | 1 1/4 in. heavy wall D.O.M. |
| Models | 2 and 4-door |
Vehicle fitment
The set covers the 2007–2018 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and in the Unlimited versions of those trims.
Coverage is limited to the 2007–2018 Wrangler JK; the JL from 2018 to 2022, TJ and LJ models fall outside this set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the set covers every control arm position, adjust all arms together once the lift is installed. Check the driveline angles after the adjustment is complete, since changes to the arms alter pinion angle.
What’s included
The set includes eight control arms. Check the package contents against your installation before starting, including bushings and hardware.






