Overview
The Crown Automotive 52104113 is a hydraulic clutch master cylinder assembly for 4 cylinder and 4.0L 6 cylinder engines. It fits the 1994–1995 Jeep Wrangler (YJ).
The master cylinder arrives pre-assembled with fluid inside, and a hose is included. Because it is pre-filled, the hydraulic system needs bleeding once the unit is installed.
Key features
- Pre-assembled at the factory with fluid inside
- Hose included with the assembly
- Designed for 4 cylinder and 4.0L 6 cylinder engines
- Fits the 1994–1995 Jeep Wrangler (YJ).
Bleeding after installation
A hydraulic clutch uses the master cylinder to push fluid through the line to the slave cylinder, which moves the release fork. Air trapped in the lines makes the pedal feel soft or spongy and can keep the clutch from fully disengaging. Removing that air after a master cylinder swap is part of the job, not an optional step, and a pedal that still feels soft points to air remaining in the system.
Before bleeding, check that the hose connections are clean and seated and that the fluid level sits where the reservoir markings indicate. Use the fluid type the vehicle’s service information calls for, and do not let the reservoir run dry during bleeding. Watch the pedal feel after bleeding and check the fittings for seepage over the next few drives.
- Soft or low pedal after installation
- Fluid seepage at the hose fittings
- Slave cylinder seals if fluid runs low again
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52104113 |
| UPC | 848399016383 |
| Part type | Hydraulic clutch master cylinder assembly |
| Engines | 4 cylinder and 4.0L 6 cylinder |
| Fitment years | 1994–1995 (Wrangler YJ) |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1994 and 1995 Jeep Wrangler (YJ).
Other Wrangler model years, including the TJ, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the unit is pre-filled, the hydraulic system must be bled once the master cylinder is installed.
What’s included
The master cylinder assembly with its hose.









