Overview
The Crown Automotive 53006 is a clutch alignment tool with a 21 spline count, for 2.5L 4 cylinder engines. A clutch alignment tool holds the clutch disc centered while the pressure plate is installed, so the transmission input shaft can slide through the disc hub.
Covered models include the Cherokee XJ, CJ5 and CJ7, Comanche, Scrambler, Wrangler TJ and Wrangler YJ, within the years given for each.
Key features
- 21 spline count
- Clutch alignment tool for the 2.5L 4 cylinder
- Covers Cherokee XJ, CJ, Comanche, Scrambler, Wrangler TJ and YJ models
- Fitment marked as direct fit
Using an alignment tool safely
A clutch alignment tool works only when the disc hub splines and the tool splines match, so a tool that is worn or bent will leave the disc off center. When the disc is misaligned, the transmission input shaft will not slide through the hub, and the clutch can be damaged when the bolts are tightened. Before using a tool, wipe it clean and check the splines for rounding, since grease and grit can hide wear.
Set the disc squarely on the flywheel and hold it in place while the pressure plate bolts are started and tightened in a crisscross pattern. Pull the tool out slowly once the pressure plate is seated, and check that it slides freely before the transmission goes back in. Replacing the pilot bearing at the same time is common practice when the clutch is out.
- Clean the tool splines before each use
- Check the disc hub for wear or glazing
- Tighten pressure plate bolts in a crisscross pattern
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 53006 |
| UPC | 848399083576 |
| Spline count | 21 splines |
| Engine | 2.5L 4 cylinder |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–2000 Jeep Cherokee (XJ), the 1983 Jeep CJ5, the 1983–1986 Jeep CJ7, the 1986–1992 Jeep Comanche, the 1983–1985 Jeep Scrambler, the 1997–2002 Jeep Wrangler (TJ) and the 1987–1995 Jeep Wrangler (YJ).
Cherokee and Wrangler years outside these ranges are not covered, and Wagoneer models are not included. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Check that the 21 spline count matches the clutch disc hub being aligned before using the tool.
What’s included
One clutch alignment tool.









