Overview
The Crown Automotive 4864843 is a Dana 30 front ring and pinion kit with a 3.73 ratio. It fits the 1996–1998 Jeep Cherokee (XJ) and the 1997–2000 Jeep Wrangler (TJ). It is a front-position gear set and a direct fit.
The fit is confirmed only for the Cherokee (XJ) and Wrangler (TJ) years below. Crown tests its parts on Jeeps before distributing them and backs the line with a 12 month/12,000 mile warranty.
This is a front gear set for the Dana 30 differential, sold as a front set only. Front sets are typically paired with a rear set of the same ratio, so choose a matching rear set separately by ratio.
Key features
- Dana 30 front axle ring and pinion set
- 3.73 gear ratio
- Front position
- Listed by Crown as a direct fit
- Fitment list covers the XJ Cherokee and TJ Wrangler years shown below
Setting up a 3.73 gear set
A 3.73 ratio changes how the engine works through the drivetrain, so the speedometer, the axle ratio and the rear ratio should be considered as a set. Mixing a front ratio with a rear ratio that does not match can strain the drivetrain and cause binding in tight turns. Confirm the rear ratio before buying the front set.
Gear sets are fitted with careful pinion depth and backlash settings, followed by a check of the tooth contact pattern. Most owners have a shop handle this work. Once installed, the gears need a break-in period, and fluid should be changed to the specified gear oil at the correct level.
- Confirm the rear axle ratio first
- Use the specified gear oil and level
- Recheck the speedometer after the change
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4864843 |
| UPC | 848399009576 |
| Axle | Dana 30 |
| Axle position | Front |
| Gear ratio | 3.73 |
| Fit type | Direct Fit (per Crown) |
| Warranty | 12 month/12,000 mile (per Crown) |
Not stated by the manufacturer: the tooth counts, the material, the rotation type of the Dana 30, and whether installation hardware is included.
Vehicle fitment
No Grand Cherokee (ZJ) is included in the fitment, so confirm fit for your vehicle’s year, model and trim before ordering.
The manufacturer fitment list for part 4864843 covers: 1996–1998 Jeep Cherokee (XJ); 1997–2000 Jeep Wrangler (TJ).
Not listed: Cherokee (XJ) outside 1996-1998, Wrangler (TJ) after 2000, the Grand Cherokee (ZJ), and other Wrangler generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front differential gear work involves setting pinion depth and backlash and checking the tooth contact pattern. Most owners have a shop do it, followed by a break-in period for the new gears.









