Overview
The complete adjustable control arm kit is an 8-arm set of front lower, front upper, rear lower and rear upper control arms for the 2007-2017 Jeep Wrangler JK, 2-door. It fits JK Wrangler and Rubicon models from those years.
The upper arms adjust from factory length to one inch longer, giving room to set pinion angle, caster and wheelbase. The lower arms are fixed. The arms can replace damaged factory arms and also serve as a bolt-on upgrade for a short arm suspension.
Key features
- Eight control arms covering front lower, front upper, rear lower and rear upper positions
- Adjustable super-flex upper arms with a range from factory length to +1 inch
- Fixed super-flex lower arms
- PT MEG bushings and greasable Zerk fittings
- Power coat finish
Setup and alignment after install
A complete control arm set changes how the axle is located, so the setup after installation matters as much as the bolt-up. Pinion angle, caster and wheelbase all shift when the arms are moved, and each one affects driveline vibration, steering return and tire wear. Measuring these with the vehicle at ride height gives a more accurate starting point than measuring on jack stands.
Adjustable upper arms make it possible to fine tune the geometry, but changing length in one place often affects another. After adjusting, recheck the alignment and inspect the driveline for binding at full articulation. Keep the greasable fittings serviced, since joints wear faster when they run dry, and check the arm mounts after the first few trail outings.
- Measure pinion and caster at ride height
- Recheck alignment after every arm length change
- Grease the Zerk fittings on a regular schedule
- Inspect arm ends for play at each service
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 700008131101 |
| Included | 8 control arms |
| Upper arm adjustment | Factory length to +1 inch |
| Lower arms | Fixed super-flex |
| Bushings | PT MEG |
| Lubrication | Greasable Zerk fittings |
| Finish | Power coat |
| Body style | 2-door |
Vehicle fitment
It fits the 2007-2017 Jeep Wrangler JK, including Rubicon models, in the 2-door body style.
This kit is for 2-door Wrangler JK models. Confirm fit for your vehicle’s year, model and trim before ordering, especially if the vehicle has four doors.
Installation notes
Set pinion angle and caster once the kit is installed and the vehicle is on the ground. The arms bolt directly into an existing short arm kit, so the mounting points line up without drilling.
What’s included
Eight control arms: front lower, front upper, rear lower and rear upper, in a complete set.














