Overview
The Rubicon Express rear adjustable upper long arm, part number RE4090, is a pair of rear upper control arms for the Jeep Wrangler JK, in 2-door and 4-door models.
The arms are adjustable and sold as a pair. Rubicon Express describes them as replacements for control arms damaged on the trail. They are rear upper long arms, which means they replace the upper arms on the rear axle rather than the front.
Key features
- Rear upper long arms, sold as a pair
- Adjustable
- For 2-door and 4-door models
- Replacement for damaged control arms
Upper arms and axle position
Rear upper arms locate the axle, so they set the pinion angle and how the axle sits under the body. Adjustable arms let you change that setting, and small changes can shift driveline angles and vibration. Set them evenly on both sides so the axle stays square to the frame.
Upper arm bushings and the frame and axle ends wear over time. Look for cracked rubber, play at the ends and bent arms after rough trail use. Have the alignment and driveline angles checked after any arm change, because the rear geometry affects tire wear and steering feel.
- Check bushings for cracks and play
- Set arm adjustments evenly on each side
- Inspect frame and axle mounting points
- Have driveline angles checked after changes
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE4090 |
| UPC | 614901441222 |
| Position | Rear upper |
| Adjustable | Yes |
| Sold as | Pair |
| Models | 2-door and 4-door |
Vehicle fitment
The arms fit the 2007–2018 Jeep Wrangler JK, in 2-door and 4-door models, so check your year and trim before buying.
Other Wrangler generations are not covered by this entry, including the TJ (1997–2006) and the JL (2018–2022). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The arms set the rear axle position, so have the alignment and driveline angles checked after installation.
What’s included
A pair of rear upper long arms.
