Overview
The Bilstein 4600 Series front shock, part number BIL24-024228, is a gas charged monotube shock with a 2 inch body diameter and boots included. It is a direct fit for four full-size GM vehicles: the Chevrolet C2500 Suburban, Chevrolet Tahoe, GMC C2500 Suburban and GMC Yukon.
Bilstein’s monotube design has no external reservoir. The company says heat from the oil moves through the outer surface of the shock body, which lets the shock dissipate heat more efficiently and last longer under load.
The dividing piston lets the oil expand as it heats, which prevents foaming and loss of viscosity. This keeps the damping steady as temperature rises, and the piston head allows separate tuning of compression and rebound for ride comfort and control.
The tube is formed by a special extrusion method for tight tolerances and consistent wall thickness. The seamless tube offers strength while helping the shock shed heat.
Key features
- Front position
- Gas charged monotube design
- 2 inch body diameter
- Boots included
- No external reservoir
- Yellow finish
- Dividing piston for stable oil volume
- Separate compression and rebound tuning
Full-size SUV front shocks
Full-size SUVs and trucks carry heavier loads than most cars, so the front shocks work hard on uneven roads and during braking. The gas pressure monotube design keeps the oil volume steady as the shock heats, which helps the damping stay consistent over longer trips. Worn front shocks often cause a loose or bouncy front end, which becomes more noticeable with a full load.
These shocks are normally fitted in pairs. Before buying, check the length and mounting points against the front springs, and inspect the boots after installation. On a full-size vehicle, worn bushings and steering parts can make a new shock feel off, so inspect them while the front end is apart.
- Compare the old and new part numbers
- Inspect the boots after fitting
- Check the front springs for sag
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL24-024228 |
| Shock series | 4600 Series |
| Position | Front |
| Shock type | Monotube, gas charged |
| Body diameter | 2 inch |
| Reservoir | None |
| Boots | Included |
| Finish | Yellow |
| Fitment | Direct fit |
Vehicle fitment
It fits 1992 to 1999 Chevrolet C2500 Suburban models in Base, LS, LT and Silverado trim; 1996 to 1999 Chevrolet Tahoe models in Base, LS and LT trim; 1992 to 1999 GMC C2500 Suburban models in Base, SLE and SLT trim; and 1996 to 1997 GMC Yukon models in SL, SLE and SLT trim.
The list does not include the C1500 or C3500 trucks, the Suburban or Tahoe models outside these years, or the Silverado and Sierra 1500 pickups. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front shocks are normally replaced as a pair. Check the length and mounts against the front springs before installing, and check the boots once the shock is fitted.
What’s included
The product is one front monotube shock with boots, under part number BIL24-024228.









