Overview
The Bilstein B6 Series 24-223911 is a rear shock absorber for Sprinter 2500 vans in single and dual rear wheel models. It fits the 2007 to 2009 Dodge Sprinter 2500, the 2007 to 2018 Freightliner Sprinter 2500 and the 2010 to 2018 Mercedes-Benz Sprinter 2500.
The shock is a monotube design with an eyelet top mount and a yellow paint finish, and it is sold individually. The B6 line uses a velocity sensitive digressive piston that reacts to changing road conditions, which Bilstein says gives consistent fade-free performance.
The body diameter is 46mm. Measure the installed length of the rear shock you are replacing before ordering.
Key features
- Rear position for Sprinter 2500 vans
- Monotube design
- Eyelet top mount
- Velocity sensitive digressive piston
- Yellow paint finish
Single and dual rear wheel setups
Sprinter 2500 vans come in single and dual rear wheel configurations, and the rear shocks are set up differently for each. A dual rear wheel van puts more weight on the rear axle, so the shock damping works through a wider load range. The rear end should stay controlled when the van carries cargo, climbs grades, or crosses uneven pavement.
Replacing a rear shock on a Sprinter means checking the eyelet mounts for wear and making sure the new unit matches the wheel configuration. Look for leaks, bounce after bumps, and uneven rear ride height. Rear shocks are normally replaced in matched pairs. Worn rear bushings and springs also affect how the shock performs, so inspect those while the van is apart.
- Confirm single or dual rear wheel before ordering
- Oil seepage on the shock body
- Cracked or flattened eyelet bushings
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-223911 |
| Shock series | B6 Series |
| Position | Rear |
| Wheel configuration | Single and dual rear wheel models |
| Shock type | Monotube |
| Top mount | Eyelet |
| Finish | Yellow paint |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2007 through 2009 Dodge Sprinter 2500, the 2007 through 2018 Freightliner Sprinter 2500 and the 2010 through 2018 Mercedes-Benz Sprinter 2500.
Sprinter models from outside those years and other Sprinter sizes are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Part 24-223911: one rear shock absorber, sold individually.
Installation notes
Confirm whether your van is a single or dual rear wheel model before ordering, and compare the eyelet mounts with the shock you are removing.









