Overview
The Bilstein B6 Series 24-014014 is a front shock absorber for Dodge B-series vans. It fits the 1971 to 1980 Dodge B200 and B300, the 1981 to 1994 Dodge B250, and the 1995 to 1998 Dodge B2500, along with other Dodge B-series model years in the same range. It has a front axle rating of 4000 lb.
The shock has a 46mm body with a stem top mount and a bar pin bottom mount, and it is a monotube design with a yellow paint finish. Compare your van’s GVWR with the 8,300 lb and 9,000 lb figures before ordering.
The B6 uses a velocity sensitive digressive piston that adjusts to changing road conditions. Each shock is tuned for its application, which gives a noticeable gain in ride quality, handling and comfort.
Key features
- Front position for Dodge B-series vans
- Monotube design with a digressive piston
- Stem top mount and bar pin bottom mount
- 46mm body diameter
- Front axle rating of 4000 lb
Matching a shock to your load
Dodge B-series vans are built for work, and their front shocks carry a large share of the load on uneven loading docks, job sites, and highway grades. A front shock that controls wheel movement helps the steering stay predictable when the van is heavily loaded. Heavier loads can compress the front springs more than expected, so the shock’s damping range matters for stability on long trips.
Before replacing a front shock, check the mounts for worn bushings, cracked eyes, and bent brackets. Look for oil on the body and listen for knocks over bumps. Because the front end works as a unit, inspect the steering linkage, ball joints, and springs at the same time. Replacing front shocks in pairs keeps both sides matched.
- Oil on the shock body
- Knocking or clunking over bumps
- Worn bar pin or stem mount hardware
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-014014 |
| Shock series | B6 Series |
| Position | Front |
| Shock type | Monotube |
| Body diameter | 46mm |
| Top mount | Stem |
| Bottom mount | Bar pin |
| Front axle rating | 4000 lb |
| GVWR ratings named | 8,300 lb and 9,000 lb |
| Finish | Yellow paint |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1971 through 1980 Dodge B200 and B300, the 1981 through 1994 Dodge B250, and the 1995 through 1998 Dodge B2500. Other Dodge B-series model years in the same range are also covered.
Dodge B-series vans from outside the years named, and other Dodge vans, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Part 24-014014: one front shock absorber, sold individually.
Installation notes
Check the bar pin bottom mount and the stem top mount against the shock you are removing, and confirm the front axle rating and GVWR on your van before ordering.









