Select your vehicle

Bilstein 46mm Monotube Shock Absorber – 24-011006

Bilstein

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear shock for 1987–1994 Nissan D21 and 1995–1997 Nissan Pickup trucks
  • Yellow, 2 in body monotube with a shock boot
  • Gas-charged design with a divider piston
  • Part number 24-011006

Description

Overview

The Bilstein 24-011006 is a yellow rear shock absorber for 1987–1994 Nissan D21 pickups and 1995–1997 Nissan Pickup trucks. It is a monotube, gas-charged shock with a 2 in body diameter and a shock boot, sold as a direct fit for those years.

Monotube shocks use one pressure tube rather than the two of a conventional twin-tube unit. A divider piston keeps the damping oil separate from the gas charge, so when the oil heats on a long grade or rough pavement, it expands without foaming. The extruded tube is formed to tight peak-to-valley tolerances for even wall thickness.

Rear dampers on these older Nissan pickups wear gradually, so the change is easy to miss until the truck starts pitching over dips. A new rear shock restores controlled axle motion. The 24-011006 fits the D21 and early Pickup years that share this rear layout, and the boot keeps road grit off the shaft.

Key features

  • Monotube gas-charged body with a 2 in body diameter
  • Divider piston that separates oil from the gas charge
  • Seamless tube formed by extrusion for tight wall tolerances
  • Piston head with independent compression and rebound tuning
  • Yellow finish
  • Shock boot included

Keeping an older Nissan pickup level

On an older compact pickup, the rear shocks carry more of the load than most owners expect, especially with a bed full of gear or a camper shell. As the dampers age, the rear begins to rock after a dip and steering can feel less settled at highway speed. Looking at the rear shocks alongside the leaf springs and bushings gives a clearer picture of what the rear needs.

Gas-charged monotube units are a practical choice for trucks that see both pavement and gravel. Keep the boot in good shape, since a torn boot lets grit reach the shaft seal. If the truck has been lifted or fitted with heavier tires, expect the dampers to work harder and check them more often than a stock schedule suggests.

  • Look for torn boots and oil on the shock body
  • Check shock eye bushings for cracks or wear
  • Inspect the leaf spring hangers while the shocks are off
  • Keep the mounting hardware tight after the first drives

Specifications

Brand Bilstein
Part number 24-011006
Shock series 4600 Series
Position Rear
Shock type Monotube, gas-charged
Body diameter 2 in
Finish Yellow
Boot Included
Fitment type Direct fit

Vehicle fitment

It fits the 1987–1994 Nissan D21 and the 1995–1997 Nissan Pickup. Those ranges cover the compact Nissan pickup body across its model years, from the D21 through the first years of the later Pickup.

The list does not include the Nissan Frontier, Xterra or Pathfinder models, or Nissan pickups from after 1997. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One rear shock absorber with its boot.

Fitment

VehicleYearsTrims
Nissan D211987–1994Base, E, SE, XE
Nissan Pickup1995–1997Base, SE, XE

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bilstein 24-011006 fit a 1996 Nissan pickup?

Yes. The 24-011006 fits the 1995 to 1997 Nissan Pickup, so a 1996 model is covered. Confirm your truck's year and body style before buying, since fit ends at 1997.

Is the 24-011006 a rear shock or a front shock?

It is a rear shock, as shown by its listed position. The unit is yellow with a 2 in body and comes with a shock boot.

What kind of shock is this?

It is a monotube, gas-charged shock. The single pressure tube and divider piston keep the damping oil from foaming as it heats, which keeps damping steadier than a conventional twin-tube shock on the same truck.

Can I use this shock on a lifted Nissan pickup?

Possibly. Check the lift height and rear axle position before ordering, because a shock sized for stock ride height may not reach full travel. Lift kits often change rear geometry, so measure the old shock's length before choosing a replacement.

How often should rear shock boots be inspected?

Check boots during every tire rotation or oil change. Look for cracks, splits or dirt packed around the shaft, since these let grit into the seal. A damaged boot is an early sign the shock may soon start leaking.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon