Overview
The Bilstein BIL22-278500 is a front right B6 Series suspension strut assembly for the 2014 to 2018 Subaru Forester. It fits the 2.0XT Premium, 2.0XT Touring, 2.5i, 2.5i Limited, 2.5i Premium and 2.5i Touring models, and Bilstein tunes the B6 for each application.
A front strut assembly combines the damper and the spring seat in one unit, so this part replaces the shock and its mount together rather than the shock alone. It has a stem-type upper mount and a bracket-type lower mount, and it ships without a boot. Check the construction and mounting against the original strut before fitting.
Key features
- Front right position
- Stem upper mount with bracket lower mount
- Supplied without a boot
- Yellow finish
- The B6 is designed to improve ride quality, handling and comfort.
Matching struts to your setup
A strut is a structural part of the suspension, so it carries braking and steering loads as well as damping the spring. When it wears, the car may wander over bumps, dip hard under braking or feel loose on turns. Replacing a strut in pairs on the same axle keeps the front end balanced from side to side.
Because the upper mount and the bearing plate work with the spring, check those parts while the old strut is off. Worn top mounts can cause clunks and uneven steering feel. Replace mount hardware that shows cracks or rust, and check the spring seat for wear.
- Inspect the upper mount for cracked rubber
- Check the bracket lower bolts for corrosion
- Re-torque the strut-to-knuckle bolts after a short drive
- Recheck alignment after any strut change
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL22-278500 |
| Series | B6 Series |
| Assembly type | Suspension strut assembly |
| Location | Front |
| Position | Front right |
| Shock type | Monotube (specification) |
| Top mount | Stem top |
| Lower mount | Bracket |
| Boot | None |
| Finish | Yellow |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2014 to 2018 Subaru Forester in 2.0XT Premium, 2.0XT Touring, 2.5i, 2.5i Limited, 2.5i Premium and 2.5i Touring models.
The list covers only 2014 to 2018 Forester models, so earlier model years and the Crosstrek are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the stem upper mount and the bracket lower mount with the original strut before fitting, and check that the bracket’s bolt pattern matches the steering knuckle on the vehicle. Work on a securely supported vehicle.
What’s included
One front right strut assembly, supplied without a boot.









