Overview
The Bilstein 4600 Series front shock, part number BIL24-013369, is a gas charged monotube shock with a 2 inch body diameter and boots included. It is a direct fit for 1989–1991 Mitsubishi Montero models in Base, LS, RS and SP trim.
It is sold as a single front unit with a 2 inch body diameter, a yellow finish and boots included.
The shock has no external reservoir. The monotube design keeps oil and gas in one tube, and heat passes from the oil to the outer surface of the body, where it is released. The tube is made by a special extrusion process with a tight peak-to-valley tolerance and consistent wall thickness.
A dividing piston lets the oil expand as heat builds, which prevents foaming and loss of viscosity so the shock keeps full damping as temperatures rise. The piston head tunes compression and rebound separately.
Key features
- Gas charged monotube design
- 2 inch body diameter
- Boots included
- No external reservoir
- Front position
- Yellow finish
- Separate compression and rebound tuning in the piston head
- Dividing piston that keeps oil stable as temperature rises
Monotube shocks and heat
A monotube shock uses one tube for oil and gas, so its damping depends on how well heat leaves the body and how the gas pressure holds the oil in place. Older Montero suspensions often have worn bushings and mounts, which change the load on the shock, so check those parts when installing a new unit.
Boots matter on any shock. A torn boot lets grit reach the rod seal, which can cause leaks over time. Fit the boots carefully so they sit properly on the rod and body, and look at them again after the first few drives.
- Check bushings and mounts for wear
- Fit boots carefully to protect the rod seal
- Look for leaks at the body and rod after installation
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL24-013369 |
| Shock series | 4600 Series |
| Position | Front |
| Shock type | Monotube, gas charged |
| Body diameter | 2 inch |
| Reservoir | None |
| Boots | Included |
| Finish | Yellow |
| Fitment | Direct fit |
Vehicle fitment
It fits 1989–1991 Mitsubishi Montero models in the Base, LS, RS and SP trims. Confirm fit for your vehicle’s year, model and trim before ordering.
The list does not include the 2001 to 2006 Montero or other Mitsubishi models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the boots carefully so the rod seal stays protected. Check the length and mounts against the springs and steering components before installing.
What’s included
The product is one front monotube shock with boots, under part number BIL24-013369.









