Overview
The Bilstein 4600 Series heavy duty rear shock, part number BIL24-184922, is a 46 mm monotube shock with a yellow finish. It is a direct fit for the 1994 to 2001 Dodge Ram 1500 in Base, Laramie, ST and Sport trim.
The shock uses a gas charged monotube design that carries heat out of the oil through the outer surface of the body. This lets the shock dissipate heat efficiently, which supports long service life.
A dividing piston allows the oil to expand as temperatures rise, so the oil does not foam or lose viscosity. Damping characteristics hold as the shock warms, and the piston head can be set up for compression and rebound separately.
The seamless tube is made with a special extrusion method for a tight tolerance and consistent wall thickness, which Bilstein links to superior tube strength and durability.
The body is a 46 mm heavy duty monotube in yellow, matching the product name and the 4600 Series heavy duty range.
Key features
- Rear position
- Heavy duty 46 mm monotube
- Gas charged design
- Dividing piston for stable oil volume
- Seamless tube with consistent wall thickness
- Separate compression and rebound tuning
- Yellow finish
Heavy duty rear shock use
A heavy duty rear shock is put to work when the bed is loaded, when towing, or when the truck runs rough roads. Under those conditions the shock produces more heat and must control more mass, so damping stability matters. A gas charged design helps the oil keep its characteristics when temperatures climb on long grades.
Replacement should consider the length and the mounts at both ends, since the rear springs set the ride height. Rear shocks are generally replaced in pairs. Inspect the rubber bushings and the boots at the same time, because worn bushings can make a new shock feel harsh.
- Check the rear spring condition
- Inspect the mounting hardware for corrosion
- Look for oil on the shock body
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL24-184922 |
| Shock series | 4600 Series, heavy duty |
| Position | Rear |
| Shock type | Monotube, gas charged |
| Body | 46 mm monotube, yellow |
| Old part number | BILF4-B46-2130-H1 |
| Fitment | Direct fit |
Vehicle fitment
It fits 1994–2001 Dodge Ram 1500 models in Base, Laramie, ST and Sport trim.
The list does not include the Ram 2500 or 3500, the Ram 1500 from 2002 onward, or the Dakota and Durango. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear shocks are generally fitted in pairs. Check the length and mounts against the rear springs before installing, and confirm the old part number against the shock being replaced.
What’s included
The product is one rear heavy duty monotube shock under part number BIL24-184922.









