Select your vehicle

Bilstein 5160 Series Shock Absorber – 25-196481

Bilstein

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear stock-mount remote reservoir shock for 2011–2026 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD
  • 46mm monotube body with digressive piston
  • Self-adjusting deflective disc valving
  • Remote reservoir for more cooling capacity and shock travel

Description

Overview

The Bilstein 5160 Series 25-196481 is a rear remote reservoir shock absorber for the 2011–2026 Chevrolet Silverado 2500 HD and 3500 HD, and the 2011–2026 GMC Sierra 2500 HD and 3500 HD. It is designed as a stock-mount replacement, so it is direct-fit to each specific vehicle application and avoids the fabrication usually needed to run a high performance reservoir shock.

The monotube shock has a 46mm digressive piston and self-adjusting deflective disc valving. The reservoir sits apart from the shock body and connects to it by a hose, which adds cooling capacity and shock travel.

Compare the mounting points and installed length with the rear shock you are replacing before ordering.

Key features

  • Stock-mount design, direct fit for each application
  • 46mm monotube with a digressive piston
  • Self-adjusting deflective disc valving
  • Remote reservoir for cooling capacity and shock travel
  • Gas charged construction

Heavy-duty towing and shock wear

Heavy-duty pickups carry higher loads, and rear shocks on these trucks do more work when a trailer is attached. Shock damping on a loaded truck should keep the rear body steady over bumps and during braking. If the rear end bounces repeatedly after a bump, the shock is likely past its useful life.

Because the reservoir adds capacity, heat is less of a concern during towing, but the hose and fittings still need regular checks. Look for oil on the body, a bent or cracked reservoir, and worn mount bushings. Replacing shocks in pairs on the same axle keeps the truck balanced under load.

  • Check tire wear for signs of weak rear damping
  • Inspect bushings when replacing the shock
  • Keep the reservoir clear of mud and road debris

Specifications

Brand Bilstein
Part number 25-196481
Shock series 5160 Series (stock mount)
Position Rear
Shock type Reservoir, monotube
Piston 46mm digressive
Valving Self-adjusting deflective disc
Gas charge Gas charged
Fitment type Direct fit

Vehicle fitment

This rear reservoir shock fits the 2011 through 2026 Chevrolet Silverado 2500 HD and 3500 HD, and the 2011 through 2026 GMC Sierra 2500 HD and 3500 HD.

Silverado and Sierra 1500 models, and HD trucks outside the 2011 to 2026 years, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One rear remote reservoir shock absorber.

Installation notes

Because the reservoir is sized to each application, confirm the fitment for your HD truck before ordering. Check hose clearance once the reservoir is mounted.

Fitment

VehicleYearsTrims
Chevrolet Silverado 2500 HD2011–2026Custom, High Country, LT, LTZ, WT
Chevrolet Silverado 3500 HD2011–2026High Country, LT, LTZ, WT
GMC Sierra 2500 HD2011–2026AT4, Base, Denali, SLE, SLT, WT
GMC Sierra 3500 HD2011–2026AT4, Base, Denali, SLE, SLT, WT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bilstein 25-196481 fit a 2015 Chevrolet Silverado 3500 HD?

Yes. This rear reservoir shock fits the 2011 to 2026 Chevrolet Silverado 3500 HD, so a 2015 model is covered. Confirm the rear position before ordering.

Is this shock designed for stock mounting?

Yes. It is a stock-mount remote reservoir shock sized for each specific vehicle application, so it does not need custom fabrication. Confirm fit for your vehicle's year, model and trim before ordering.

What does the reservoir add?

Bilstein lists increased cooling capacity and increased shock travel as the benefits of the reservoir. The reservoir is connected to the shock body by a hose.

Do heavy-duty trucks need different shocks than half-ton trucks?

Usually yes. Heavy-duty trucks carry heavier loads and see higher axle weights, so shock sizing and valving are matched to a specific application. Confirm the year and model before ordering.

How can you tell rear shocks are worn on an HD pickup?

Watch for excess bounce after bumps, uneven tire wear, oil on the shock body and a loose feel when towing. Inspect the reservoir hose and fittings at the same time.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon