Select your vehicle

Bilstein B6 Series Monotube Shock Absorber – 24-283649

Bilstein

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear B6 Series monotube shock for 2018–2023 Subaru Crosstrek
  • Monotube design with velocity sensitive digressive piston
  • Tuned for each application
  • Yellow paint finish, sold individually

Description

Overview

The Bilstein B6 Series 24-283649 is a rear monotube shock absorber for the 2018–2023 Subaru Crosstrek. It has OEM top, body and bottom mounts, a yellow paint finish and is sold individually.

The B6 line is a monotube design with a velocity sensitive digressive piston. Tuning is set for each application, and the design is intended to deliver steady damping, better ride quality, handling and comfort.

Because the mounts are OEM, the shock is meant to take the factory points on the Crosstrek, and the mounting arrangement matches the stock unit. Check the model and body style against your vehicle before buying.

Key features

  • Rear position
  • Monotube design
  • Velocity sensitive digressive piston
  • OEM top, body and bottom mounts
  • Yellow paint finish

Rear suspension on a small SUV

Rear shocks on a small crossover work through a lighter load than a truck, but they still control body motion over road joints and during quick stops. A monotube shock with a velocity sensitive piston responds to changing speed, which helps keep the rear end composed on everyday roads. Factory mounting points make installation simpler when the old unit is removed in the same position.

Rear shocks on a crossover often wear before they fail outright. Watch for a rear end that keeps bouncing, uneven tire wear and a faint knock over bumps. Inspect the upper and lower bushings during the same job, since worn bushings can make a new shock feel loose on the vehicle.

  • Compare the mounts before tightening
  • Check for leaks on the shock body
  • Replace both rear shocks together

Specifications

Brand Bilstein
Part number 24-283649
Shock series B6 Series
Position Rear
Shock type Monotube
Top mount OEM
Body OEM
Bottom mount OEM
Finish Yellow paint
Fitment type Direct fit

Vehicle fitment

It is a direct fit for the 2018 through 2023 Subaru Crosstrek.

Subaru Crosstrek models outside 2018 to 2023, and other Subaru models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Part 24-283649: one rear shock absorber, sold individually.

Installation notes

Because the mounts are OEM, the shock should bolt in at the factory points. Compare both mounts with the shock you are removing before tightening, and keep the fasteners at the factory positions.

Fitment

VehicleYearsTrims
Subaru Crosstrek2018–2023Base, Hybrid, Limited, Premium, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bilstein 24-283649 fit a 2019 Subaru Crosstrek?

Yes. It is a direct fit for the 2018 to 2023 Subaru Crosstrek, so a 2019 model is covered. Confirm the rear position before ordering.

Does this shock use factory mounting points?

Yes. The mounts are OEM top, body and bottom mounts, so the shock is meant to bolt into the factory locations on the Crosstrek.

Is the shock sold as a pair?

No. The shock is sold individually, so a rear pair needs two orders. Match the left and right units to the same vehicle position.

How can I tell if a rear shock is worn on a crossover?

Look for oil on the shock body, a rear end that keeps moving after bumps and uneven rear tire wear. A bounce test can help, but a worn shock is confirmed by inspection with the vehicle lifted or with the shock removed.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon