Overview
The Bilstein 4600 Series heavy duty monotube shock absorber, part 33-185347, is a gas charged shock with a 2 inch body and a yellow finish. It is a direct fit for the 1999-2004 Ford F-350 Super Duty, comes with boots, and has no remote reservoir.
The tube is extruded through a controlled process that keeps peak-to-valley tolerance tight and wall thickness even along the body. The seamless tube adds strength and helps move heat out of the oil, which supports shock life.
The piston head is tuned so compression and rebound damping can be set independently, which Bilstein links to ride comfort and control. The design uses fewer parts than conventional twin tube and so called road sensing shocks, and the digressive piston is presented as a long-life design.
Key features
- Gas charged monotube with a 2 inch body
- Heavy duty monotube construction
- Yellow finish
- Boots included
- No remote reservoir
- Independent compression and rebound damping tuning
- Direct fit for the Ford F-350 Super Duty
Choosing a replacement monotube
A monotube shock keeps the oil and a separate gas-charged piston in one tube, so damping tends to hold up when the shock runs hot. Heavy duty trucks put more load through the shock body on rough roads and trailer work, so the tube wall, seals and mounts see more stress over time. When replacing a shock on a heavy truck, match the body size and mount style to the original before comparing features.
Gas charged shocks carry internal pressure, so they should be handled as pressurized parts. Look for leaking oil on the body, a shock that feels soft or bouncy after a few miles, or a clunk at the mounts. Replacing both shocks on the same axle keeps damping even from side to side. Inspect the boots and bushings when the shock comes off, since worn boots let grit into the seal.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-185347 |
| UPC | 651860433837 |
| Shock series | 4600 Series |
| Shock type | Monotube, direct fit |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | None |
| Boots | Included |
| Charging | Gas charged |
Vehicle fitment
It fits the 1999-2004 Ford F-350 Super Duty, covering the Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Only the 1999-2004 Ford F-350 Super Duty is listed here, so the F-250 Super Duty is not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No reservoir hose needs routing on this model, so the install focuses on the shock body and its mounts. Gas charged shocks are pressurized, so do not heat, puncture or disassemble the body during installation or disposal. Compare the body diameter (2 in) and mounting points with your original shock before you start.
What’s included
Boots are included with this shock. Check your existing mounting hardware against the new shock before installing.









