Overview
The Bilstein 24-022842 is a 46mm monotube gas charged shock absorber for the front of the 1995–2004 Toyota Tacoma. It belongs to the 4600 Series, is built as a heavy duty unit, and has a yellow finish. It suits drivers who want steady damping on rough roads and trails.
Bilstein’s monotube layout places one pressure tube around the working parts. Heat from the oil travels through that tube and leaves into the air, which helps the shock keep its damping as it warms during extended use. A dividing piston separates the oil from the gas and lets the oil expand as heat builds, so foaming and thinning of the fluid are limited. The tube is produced by a special extrusion method that holds a tight peak-to-valley tolerance and an even wall, and the seamless construction is meant to add strength and service life.
Key features
- Heavy duty monotube body in a 46mm size
- Gas charged design that moves heat out through the outer tube surface
- Dividing piston lets the oil expand as it heats without aerating
- Seamless tube made by special extrusion for consistent wall thickness
- Compression and rebound damping tuned independently in the piston head
- Fewer parts than conventional twin tube designs
Matching a Tacoma shock
A Tacoma’s front suspension carries a lot of weight through the steering and control arms, so the shock has to control both bump and rebound loads without fading. A monotube design with a separate piston and gas charge helps the damper hold its feel when the shock warms up on long grades or repeated washboard.
Trucks that have been fitted with larger tires, wheels or bumpers carry extra weight at the front, which changes how the suspension moves. If the truck has been lifted or re-tired, check the bushings, ball joints and steering stabilizer before refitting, since those parts wear alongside the shock.
Look for oil streaks on the outer tube, a loose or knocking feel over bumps, and uneven front tire wear. Keep the dust boot clean and inspect it for splits, since grit entering the piston area shortens seal life.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-022842 |
| UPC | 651860651217 |
| Shock series | 4600 Series |
| Shock type | Monotube, gas charged, heavy duty |
| Size | 46mm |
| Position | Front |
| Fitment type | Direct fit |
| Finish | Yellow |
| Lift height | Stock height, with 0 in. lift or drop |
| Previous part number | BILF4-B46-2284-H1 |
Vehicle fitment
It is a direct fit for the 1995–2004 Toyota Tacoma in Base, Limited, Pre Runner and SR5 trims.
Later Tacoma model years and other Toyota models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber is included. Check the package contents for mounting hardware before installation.









