Overview
The Bilstein 24-225441 is a rear 5100 Series monotube shock absorber with a stem upper mount, made for lifted vehicles that run larger tires. No vehicle is named for this part number.
The monotube design and digressive valving respond quickly to changing road inputs, keeping the ride stable and controlled on and off road, loaded or unloaded.
Key features
- Rear position
- Monotube design with digressive valving
- Stem upper mount
- 46mm ID smooth body, non-coilover
- Travel length of 6.52 in.
- Zinc-plated finish
Lifted rear suspension basics
Larger tires increase rotating weight and change leverage on the suspension, which places more load on the rear shocks. A monotube shock with digressive valving can handle that extra work by controlling sharp motion without stiffening the ride too much. For trucks that carry cargo, rear damping also helps keep the tail from bouncing after a bump.
When a suspension is lifted, the shock’s extended and collapsed lengths must suit the new travel, or it may bottom out or run out of stroke. Look at the stem upper mount and mounting hardware, and confirm the shock clears the spring, bump stop and frame. Replace rear shocks in pairs and inspect the rear bushings, bump stops and brackets while the shock is off.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-225441 |
| UPC | 651860713991 |
| Shock series | 5100 Series |
| Position | Rear |
| Upper mount | Stem |
| Shaft diameter | 14 mm |
| Collapsed length | 22.54 in. |
| Extended length | 16.02 in. |
| Travel length | 6.52 in. |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Monotube |
| Reservoir | No |
| Finish | Zinc plated |
| Boot included | No |
| Lift height | 0 to 1 in. (lift height field) or 0 to 2.75 in. (product summary) |
| Charge type | Gas charged |
Vehicle fitment
No vehicle fitment is named for this shock. Check your vehicle’s rear suspension and lift height before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm both length measurements against your original rear shock before installing.
What’s included
Check the hardware needs for your installation before starting.
Not included: The boot is not included.









