Overview
The Bilstein 4600 Series shock absorber, part number 24-186063, fits the 2006–2008 Dodge Ram 1500, the 2003–2010 Dodge Ram 2500 and 3500, and the 2011–2012 Ram 2500 and 3500. It is a 2 in gas-charged monotube with a yellow finish, no reservoir and boots included, with a Direct Fit design.
A dividing piston lets the oil expand as the shock warms, so foaming and thinning are held back. Heat moves from the oil through the body to the outer surface. The piston head tunes compression and rebound separately. The tube is seamless and extruded to a tight wall tolerance, which supports durability under heavy loads.
Key features
- Gas-charged monotube in a 2 in body.
- Dividing piston that accommodates expanding oil.
- Seamless tube with consistent wall thickness.
- Independent compression and rebound tuning.
- Yellow finish.
- Boots included.
Towing and heavy-duty use
Heavy-duty pickups carry more weight and see more load changes than lighter trucks, so their shocks do more work over a year. A gas-charged monotube design helps the damping stay consistent when the oil heats during long grades or repeated bumps. The piston head allows compression and rebound to be adjusted on their own, which can be useful when the truck runs loaded or unloaded.
Worn shocks make a heavy truck feel floaty over washboard roads and cause nose dive under braking. Inspect the body for oil, check the boot for tears, and look at the mounts for cracked rubber. If the truck has been towing heavy loads, check the springs and bushings as well, because they share the same work.
- Check for oil on the body after heavy loads
- Inspect boots for tears
- Look for cracked mount rubber
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186063 |
| UPC | 651860558974 |
| Shock series | 4600 Series |
| Shock type | Monotube |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Hydraulic / gas charged | Gas charged |
| Fitment | Direct Fit |
Vehicle fitment
The fit covers the 2006–2008 Dodge Ram 1500 in Laramie, SLT and SXT trims, the 2003–2010 Dodge Ram 2500 and 3500, and the 2011–2012 Ram 2500 and 3500. The 2009–2012 Ram 1500 model years are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the mounting position against your existing shock before fitting, and check that it matches. Gas-charged units are pressurized, so have them handled by a qualified shop.
What’s included
One shock absorber with a boot. Check the package contents against your original shock before installing, since separate mounting hardware may be needed.









