Overview
The Bilstein 5100 Series rear shock absorber, part number 33-186887, is a gas-charged monotube unit with a 12.1 mm lower eye and a bar pin upper mount. It is rated for a 4 in. lift and sold as each.
Bilstein positions the 5100 Series for lifted trucks, Jeeps and prerunners, using a single-tube gas-pressure design. This unit has a 46 mm ID non-coilover smooth body, a 14 mm shaft, a zinc plated finish and a boot included. No specific vehicle is named.
Key features
- Monotube gas pressure body
- Self-adjusting deflecting disc valving
- High-flow piston that Bilstein says reduces harshness
- Independent rebound and compression tuning
- Larger working piston area
- Designed for manufacturer lift kits on the stock mounting setup
Matching the upper mount
The bar pin upper mount is a different style from the eye or stem mounts found on many factory setups, so the upper bracket has to be a matching pin-style design. Look at the bracket’s bore and the pin diameter before ordering, and confirm the pin sits square without forcing it. A mismatched upper mount can bind the shock and wear the bushing quickly.
Gas-charged monotube shocks are sensitive to side loading, so the shock should line up straight between the lower and upper mounts. When a lift changes the mounting angle, check clearance at full compression and extension before driving. Replacing the bushings along with the shock is a common way to keep the new unit moving freely.
- Check upper bracket pin fit before buying
- Look for side wear on the bushing
- Test clearance at full compression
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-186887 |
| UPC | 651860592657 |
| Series | 5100 Series |
| Position | Rear |
| Collapsed length | 16.96 in. |
| Extended length | 27.36 in. |
| Travel length | 10.4 in. |
| Lower mount | Eye, 12.1 mm |
| Upper mount | Bar pin |
| Shaft diameter | 14 mm |
| Body design | 46 mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Reservoir | No |
| Boot included | Yes |
| Gas charged | Yes |
| Finish | Zinc plated |
| Fitment type | Direct fit |
| Lift height | With 4 in. lift |
| Sold as | Each |
Vehicle fitment
It is not tied to a specific vehicle, year or trim. Lifted trucks and Jeeps are the intended applications, so match the year, model and trim to your truck before buying.
Measure your existing shock and bracket before deciding, and compare the 16.96 in collapsed length against your current unit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bar pin upper requires a matching pin-style mount, so check your upper bracket before fitting. The 12.1 mm lower eye should also match your lower mount.
What’s included
One shock absorber, sold as each, with a boot included. Check the package contents against your installation before starting.












