Overview
Part number 33-230337 belongs to Bilstein’s 5125 Series, a range of monotube shocks meant for builds where no direct Bilstein fitment exists. The body runs high gas pressure, and a 46mm piston sets the damping package with self-adjusting deflective disc valving.
Length and valve rate vary across the series, so confirm both against your target travel before choosing this unit.
Key features
- Monotube body under high gas pressure
- 46mm piston
- Self-adjusting deflective disc valving
- Industry standard 5/8 inch hourglass bushings
- Designed for custom suspension builders
Custom build considerations
A custom monotube shock is usually chosen for a build where the mounts, travel and ride height are planned from scratch. Eye-to-eye and stem-to-eye mounts are common, and the 5/8 inch bushing size sets the pin diameter, so the bracket hole and bushing need to match before the shock is fitted.
Length and valve rate decide how the shock behaves on a given suspension. A shock that is too short will bottom out, while one that is too long can rub or change the geometry. Measure the fully extended and compressed lengths on the actual vehicle, and make sure there is clearance through the full range of suspension movement. Use bushing sleeves and spacers if the pin does not fit cleanly.
- Measure eye-to-eye length at full droop and full compression
- Check bushings for play once installed
- Confirm the bracket sits square to the axle
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-230337 |
| UPC | 651860728124 |
| Shock series | 5125 Series |
| Charge | Gas charged |
| Body design | Monotube, high gas pressure |
| Piston | 46mm |
| Valving | Self-adjusting deflective disc |
| Bushings | 5/8 inch hourglass |
| Mount style | Eye/eye or stem/eye. Confirm the mount style matches your existing hardware before ordering. |
| Fitment label | Universal Fit |
Vehicle fitment
It is labeled Universal Fit. Judge compatibility from your own mounting and length dimensions rather than a named application.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the mount style and the 5/8 inch bushing size to your existing hardware, then check the fully extended and compressed lengths against your suspension travel before installation.
What’s included
One shock absorber with 5/8 inch hourglass bushings. Check brackets, nuts and other hardware against your installation before starting.









