Overview
The Bilstein 24-185264 is a 5100 Series shock absorber with a 46mm ID smooth body, monotube design, zinc plated finish and an eye-style lower mount. The manufacturer list places it on the 2004–2006 Jeep Wrangler (LJ) and 1997–2006 Jeep Wrangler (TJ).
The 5100 Series is built as a single-tube monotube for lifted trucks, Jeeps and prerunners. The single-tube gas pressure body works with self-adjusting deflecting disc valving, a high-flow piston and a larger working piston area for damping control.
The design suits large-diameter tire setups and lift kits that keep the stock O.E.M. mounting configuration. Check the mount types against your kit before fitting.
Key features
- Eye 12.7mm lower mount with a bar pin upper mount
- Self-adjusting deflecting disc valving
- High-flow piston intended to reduce harshness
- Independent rebound and compression tuning
- Zinc plated finish with a boot included
Eye and bar pin mounts
Mount style is one of the first things to confirm when comparing shocks for a Wrangler. An eye lower mount takes a round bushing around a bolt, while a bar pin takes a cylindrical pin through a clevis. Those two styles do not interchange without adapters, so comparing mount types on the truck and the shock prevents a wasted trip. Suspension geometry on a Wrangler also changes with lift, which affects how far each shock moves.
Bushings on the eye end wear with age and can allow clunks or wobble at the axle. Replacing a shock with a worn bushing can leave the new unit working against play in the mount. Check the stem or pin for bends and clean the mount holes of rust before installing. Follow the vehicle’s service torque values for the mount bolts rather than estimating them.
- Confirm the eye and bar pin sizes on your Wrangler
- Inspect bushings for cracks and flattening
- Use the vehicle’s torque values for the mount bolts
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-185264 |
| UPC | 651860453415 |
| Shock series | 5100 Series |
| Collapsed length | 14.63 in. |
| Extended length | 23.07 in. |
| Travel length | 8.44 in. |
| Lower mount | Eye 12.7mm |
| Upper mount | Bar pin |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Monotube |
| Charge | Gas charged |
| Reservoir | No |
| Finish | Zinc plated |
| Boot included | Yes |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ) in Unlimited and Unlimited Rubicon trims and the 1997–2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims. Wrangler JK models from 2007 onward are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Wrangler JK models from 2007 onward are not on the list, and years outside these ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The shock absorber and its boot are the items described.
Not included: No lift components or brackets are included. Match the mount types on your Wrangler to the eye lower and bar pin upper before installing.












