Overview
The Bilstein B8 5100 Series is a front shock absorber for 2011 to 2017 GMC Sierra 2500 and 3500 HD trucks and 2011 to 2017 Chevrolet Silverado 2500 and 3500 HD trucks. It is a direct fit design for lifted trucks and SUVs. No part number is assigned to it, so match it by UPC 651860772776 and the specifications below.
The B8 5100 uses a monotube design that resists fade during repeated use. A velocity sensitive, digressive piston adjusts damping to changing road conditions. Each shock is tuned for its specific application, which improves ride quality, handling and comfort.
Key features
- Monotube design that resists fade during repeated use
- Velocity sensitive, digressive piston that reacts to changing road conditions
- Application-specific tuning for each truck.
- Direct fit design for lifted trucks and SUVs
- Non-coilover 46mm ID smooth body with a mono tube internal design
- Boot included to cover the shock body
Lifted truck considerations
A lifted truck changes the geometry of the front suspension, so the shock’s length at ride height matters as much as its damping. Shocks that are too short or too long for the new position can run out of travel, bottom out or bind at the mounts. Monotube shocks with a smooth body and no external reservoir fit tight spaces well, but they still need clearance for full compression and rebound. Check the shock against the new ride height before installation.
Front shocks work with the springs, bushings and steering linkage, so worn parts elsewhere can make a new shock feel harsh or noisy. Inspect upper and lower mounts, bushings and the boot at each service, and replace damaged boots early so dirt does not reach the piston rod. Hard use on lifted trucks often wears the mounting hardware first, so tighten it after the initial drives. Shocks can also lose damping when hot, so allow them to cool after long descents.
Specifications
| Brand | Bilstein |
|---|---|
| UPC | 651860772776 |
| Position | Front |
| Collapsed length | 14.06 in |
| Extended length | 18.43 in |
| Travel length | 4.37 in |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Reservoir | No |
| Finish | Zinc plated |
| Boot included | Yes |
Vehicle fitment
The fitment covers 2011 to 2017 GMC Sierra 2500 and 3500 HD trucks and Chevrolet Silverado 2500 and 3500 HD trucks.
Fit is confirmed only for the 2500 and 3500 HD models from 2011 to 2017. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bilstein names lifted trucks as the intended application, so check that the collapsed length of 14.06 in and extended length of 18.43 in suit your suspension height before installing. Shock absorbers affect vehicle handling, so have a qualified installer confirm mounting and operation.
What’s included
The shock absorber is listed with a boot included.
Not included: Check the package contents for mounting hardware before starting the install.








