Select your vehicle
-13%

Bilstein 5100 Series Ride Height Adjustable Shock Absorber – 24-294218

Bilstein

$143.54In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 7:00 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front ride height adjustable shock for 2019–2023 Ford Ranger
  • Up to 2.5 in front lift with OE springs
  • Collapsed length 14.59 in, extended length 19.26 in
  • 46mm zinc-plated snap-ring grooved body, sold individually

Description

Overview

The Bilstein 5100 Series 24-294218 is a front shock absorber for the 2019–2023 Ford Ranger. It is ride height adjustable and allows up to 2.5 inches of front lift, set by the spring seat position in the shock body.

The unit has a 46mm snap-ring grooved body with a zinc-plated finish. Its collapsed length is 14.59 inches and its extended length is 19.26 inches. The shock is a monotube design with a digressive piston and a self-adjusting deflective disc valve.

The lift is rated at 0 to 2.5 inches, and the lift height field gives the same range. The shock is a front unit only, so a Ranger lifted at the rear needs its own rear shock.

Key features

  • Front lift of up to 2.5 in with OE springs
  • Snap-ring grooved 46mm zinc-plated body
  • Collapsed length 14.59 in and extended length 19.26 in
  • Monotube design with a digressive piston
  • Sold individually

Pairing front and rear lift

A front shock with a wider lift range can make the front end sit higher than the rear if the rear is left stock, so it is worth planning the whole ride height at once. The front and rear shocks each control part of the suspension, and matching them keeps the truck balanced on the road and off it.

Rangers are often driven on gravel and trail surfaces, so the front shock sees more impact than on pavement. Check the mounts and bushings after rough use, and look for oil seepage at the shaft seal, which often shows up first on the lower body.

  • Plan the front and rear ride height together
  • Inspect mounts and bushings after rough trail use
  • Check the shock body for dents from rock strikes

Specifications

Brand Bilstein
Part number 24-294218
Shock series 5100 Series (ride height adjustable)
Position Front
Shock type Monotube, gas-charged
Body diameter 46mm
Front lift 0 to 2.5 in
Collapsed length 14.59 in
Extended length 19.26 in
Top mount OEM
Bottom mount OEM
Finish Zinc plated
Fitment type Direct fit

Vehicle fitment

It fits the 2019 through 2023 Ford Ranger, covering the model years of that range.

Ford Ranger models before 2019 and the F-150 and Bronco are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Part 24-294218: one front shock absorber, sold individually.

Installation notes

Set the spring seat for the lift you need and recheck the front alignment after the new ride height settles, since a higher front end changes the geometry.

Fitment

VehicleYearsTrims
Ford Ranger2019–2023Lariat, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bilstein 24-294218 fit a 2020 Ford Ranger?

Yes. It fits the 2019 through 2023 Ford Ranger, so a 2020 model is covered. Plan the front lift within the rated range of up to 2.5 inches.

How much front lift does this shock provide?

Up to 2.5 inches with OE springs. The lift is set by choosing the spring seat position, so the exact amount depends on the groove used and the springs fitted.

Is this shock sold as a pair?

No. It is sold individually, so a front pair needs two orders. Match both units to the same lift setting so the truck sits level side to side.

How do I know whether the front shock needs replacing?

Look for leaking fluid, a bouncy or clunking front end, and uneven tire wear across the front axle. A shock that no longer controls the spring can make the truck feel loose on turns.

Should the front springs be checked when the shock is changed?

Yes. Worn or sagging springs can reduce the lift a new shock gives and alter how the front end settles. Inspect the springs for cracks and compare their height to the other side.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon