Overview
The Bilstein 24-187008 is a 4600 Series gas-charged monotube shock absorber. It fits the 2005–2015 Nissan Xterra in the Off-Road, S, SE and X trims. It has a 2 in body diameter, a yellow finish and no reservoir, and boots are included.
A monotube shock keeps its working oil in a single tube, with a dividing piston separating the oil from the gas charge. The single-tube layout moves heat from the oil through the shock body, and the dividing piston lets the oil expand as it warms, helping prevent foaming and loss of damping. The digressive piston design uses fewer parts than many conventional twin-tube and road-sensing shocks.
Key features
- Gas-charged monotube body that moves heat from the oil into the outer shock body.
- Dividing piston lets the oil expand as heat builds, reducing aeration and viscosity loss.
- Tube made with a special extrusion method for a tight peak-to-valley tolerance and consistent wall thickness.
- Piston head allows compression and rebound damping to be tuned independently.
- Digressive piston design with fewer parts than most twin-tube designs.
- Boots included with the shock absorber.
- Yellow finish on a 2 in body diameter shock.
Xterra suspension upkeep
The Xterra’s rear and front dampers work across rough trails, gravel roads and highway speeds, so they tend to show wear gradually. A shock that has lost control often makes the body feel floaty after dips and rough sections. Simple checks at each oil change help catch problems early, before the tires begin to wear unevenly.
When replacing a shock on this vehicle, look closely at the upper and lower mounts and the bushings that hold them. Clean the threads and use fresh hardware where the old set has corroded. Keep the rod clean and the boot in good condition, since grit on the rod can damage the seal and shorten the shock’s life.
- Rod surface and seal condition
- Boot condition after trail use
- Upper and lower mount bushings
- Uneven tire wear
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-187008 |
| UPC | 651860597652 |
| Shock series | 4600 Series |
| Type | Monotube |
| Body diameter | 2 in |
| Charge | Gas charged |
| Reservoir | No |
| Finish | Yellow |
| Boots included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2015 Nissan Xterra in the Off-Road, S, SE and X trims. Years before 2005 and after 2015 are not covered, and no other Nissan model applies.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One 4600 Series shock absorber with boots. The shock has no reservoir, and no mounting hardware is named.









