Overview
The Bilstein 46mm Monotube Shock Absorber, part number 24-186155, is a heavy duty rear-position gas charged shock for the 2005–2018 Nissan Frontier and 2009–2012 Suzuki Equator. It has a yellow finish and a 0 in lift/drop rating. It carries UPC 651860587950 and the older part number BILF4-BE5-D744-H0.
Dampers control how the springs move after each bump, so damping affects control on washboard roads, rocky trails and highway driving. This is a monotube design with oil and gas in one tube, built for heavy duty use.
Key features
- Heavy duty rating with a 46mm monotube body
- Gas charged design, shown in the specifications as Gas Charged
- Dividing piston lets the oil expand as temperature rises, reducing foaming.
- Single tube that carries heat from the oil outward, which the brand says aids dissipation
- Tube formed by a special extrusion method for tight tolerance and even wall thickness
- Piston head with compression and rebound damping that can be tuned independently
- Rear position with a Direct Fit listing and a 0 in. lift/drop
- Older part number BILF4-BE5-D744-H0 is also associated with this shock
Reading a shock’s damping rate
Damping controls how quickly spring energy is absorbed after a bump. A firmer setting resists movement and can feel controlled on highways, while a softer setting takes up small irregularities more easily. Compression and rebound are separate forces, so a shock that tunes both can be matched to how the truck is used.
Heavy duty rear shocks for pickups are often chosen for towing, rough trails or loaded beds, where the damping demand is higher. When comparing units, consider how the truck is used and whether the rear position matches. Replacing with an identical design keeps the ride close to the original.
- Match the rear position before buying
- Consider how often the truck carries loads
- Replace in pairs where possible
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186155 |
| Older part number | BILF4-BE5-D744-H0 |
| UPC | 651860587950 |
| Series | 4600 Series, heavy duty |
| Body | 46mm monotube |
| Position | Rear |
| Gas charged | Yes |
| Finish | Yellow |
| Fitment type | Direct Fit |
| Lift/drop | 0 in. |
Vehicle fitment
It fits the 2005–2018 Nissan Frontier in Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV and XE trims, and the 2009–2012 Suzuki Equator in Base, Premium, RMZ-4 and Sport trims. Years outside those ranges are not covered. This is a rear unit, which matters because a front unit is a different fit.
Models not named above are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear shock absorber, part number 24-186155. Confirm boot and reservoir needs against your installation before ordering.
Not included: Mounting hardware is not part of the package, so check your installation needs before starting.









