Overview
The Bilstein 25-218206 is a rear 46mm monotube remote reservoir shock absorber from the 5160 Series, made for 2011–2018 Chevrolet Silverado 2500 HD and 3500 HD and GMC Sierra 2500 HD and 3500 HD trucks. It is a stock mount, direct fit design for a 3 – 4 in. lift.
The stock mount reservoir layout means a high performance reservoir shock can be fitted without the fabrication it usually needs. The reservoir adds cooling capacity and shock travel, and the 46mm digressive piston uses self-adjusting deflective disc valving.
Key features
- Remote reservoir design that Bilstein says increases cooling capacity.
- Stock mount, direct fit to each listed vehicle application.
- 46mm digressive piston with self-adjusting deflective disc valving.
- Increased shock travel from the reservoir design.
- Listed lift height of 3 – 4 in. lift.
- Zinc plated finish.
Before you install
A remote reservoir changes the layout of the rear suspension, so plan the mounting location before removing the old shock. The reservoir needs airflow to shed heat, and it should sit clear of the tire, the frame and any crossmembers through the full range of travel. Route the hose so it has slack at full extension and no sharp bends.
Heavy-duty trucks often carry loads that generate more heat in the damper, so the reservoir’s extra oil capacity is useful on long grades. Inspect the upper and lower mounts, the bushings and the reservoir clamp at the same time as the shock. Replacing both rears together keeps the truck level and the ride consistent.
- Clearance to the tire at full compression
- Hose routing with slack at full extension
- Upper and lower mount condition
- Reservoir clamp tightness after the first drive
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-218206 |
| UPC | 651860697734 |
| Shock series | 5160 Series |
| Position | Rear |
| Collapsed length | 18.17 in. (461.5 mm) |
| Extended length | 31.26 in. (794.0 mm) |
| Finish | Zinc plated |
| Reservoir | Yes |
| Body | 46mm ID smooth body, non-coilover |
| Design | Monotube, gas charged |
| Fitment type | Direct fit |
| Lift height | Designed for 3 – 4 in. lift |
Vehicle fitment
The 2011–2018 Chevrolet Silverado 2500 HD (High Country, LT, LTZ, WT) and 3500 HD (High Country, LT, LTZ, WT) and the 2011–2018 GMC Sierra 2500 HD and 3500 HD (Base, Denali, SLE, SLT, WT) are a direct fit for this rear shock.
Silverado and Sierra 1500 models, and model years before 2011 or after 2018, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that your truck’s lift falls within the listed 3 – 4 in. range before fitting. Keep heat and punctures away from the pressurized gas body during work.
What’s included
One rear shock absorber with remote reservoir. Check the package contents for mounting hardware before starting the installation.









