Overview
The Bilstein 24-187060 is a 5100 Series mono tube shock absorber with a 46mm smooth non-coilover body, a zinc plated finish and a boot included. Confirm fit for your vehicle’s year, model and trim before ordering, and confirm the lift kit match.
Bilstein positions 5100 Series shocks for lifted trucks, Jeeps and prerunners. This model uses the company’s gas pressure monotube design with self-adjusting deflecting disc valving and a high-flow piston, which Bilstein says reduces harshness. Independent rebound and compression tuning, plus a larger working piston area, are meant to give precise damping control with large diameter tires.
Key features
- Monotube gas pressure construction.
- Self-adjusting deflecting disc valving.
- High-flow piston that Bilstein says reduces harshness.
- Independent rebound and compression tuning.
- Larger working piston area for damping control.
- Designed for large diameter tires.
- Built for specific manufacturer lift kits that use the stock O.E.M. mounting configuration.
- Boot included.
Tire size and damping
Larger tires add weight, rotating inertia and leverage to the suspension, so the shock has to control more motion than it would with stock tires. A shock with independent rebound and compression tuning gives more control over how the tire returns after a bump. On a truck that sees both highway and trail use, this matters most during hard braking and fast washboard runs.
Before fitting larger tires, check clearance at full compression and steering lock, and confirm the shock still has room to extend on the lift. Inspect the rod and boot after the first few trips, since grit thrown by bigger tires can reach the seal. Keep the rebound setting in mind when comparing tire sizes, because a heavier tire can change how the shock feels over bumps.
- Tire clearance at full compression
- Shock travel after lifting
- Rod and boot after first trips
- Rebound feel with heavier tires
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-187060 |
| UPC | 651860597188 |
| Shock series | 5100 Series |
| Collapsed length | 12.81 in |
| Extended length | 20.06 in |
| Travel length | 7.25 in |
| Lower mount | Eye 14mm |
| Upper mount | Eye 16mm |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Reservoir | No |
| Finish | Zinc plated |
| Boot included | Yes |
Vehicle fitment
No vehicle is named for this shock, and no make, model or years appear. Bilstein describes 5100 Series shocks for lifted trucks, Jeeps and prerunners, but a match against your lift kit is needed to confirm which vehicles it suits.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 46mm body is made for specific manufacturer lift kits that keep the stock OEM mounting configuration, so check that your kit matches before installing.
What’s included
The shock absorber comes with a boot. It has no reservoir and no mounting hardware is named.









