Overview
The Bilstein 4600 Series B46-0046 is a front shock absorber for Jeep SJ-generation vehicles, including the Cherokee, Wagoneer and Grand Wagoneer, and for the Jeep J10 and J20 trucks. It is a monotube, gas-charged shock with rubber bushings and a blue boot, sold one at a time.
Older Jeeps like these were built with twin-tube shocks that lose damping as their oil heats. A monotube design runs one pressure tube with a divider piston that separates the oil from a gas charge. The gas keeps the oil from foaming, so the front end keeps the same resistance during a long highway run or a stretch of washboard. For a worn shock on an older Jeep, this design is the main difference from the factory unit. Because these trucks and Jeeps rely on the front shocks to control axle movement, a worn unit shows up quickly as bounce and wander on the highway, and a new front shock restores that control in a single step.
Key features
- Monotube construction with a divider piston and gas charge
- Gas-charged body for steady damping as the oil heats
- Rubber bushings at the mounts
- Digressive piston design that adapts to changing road conditions
- Seamless tube made with an extrusion process for even wall thickness
- Blue boot included
Front shocks on classic Jeeps
Front shocks on older Jeep trucks and wagons work hard on washboard roads and during steering inputs at highway speed. Worn units let the front end wander and bounce after a dip, which can make steering feel vague. Because the front end is linked to steering, a tired damper is worth replacing before it causes wander that is hard to correct with alignment alone.
Before buying, compare the mounting eyes and overall length with the shock being removed. Classic Jeep front ends changed through their production years, and a shock that suits the wrong bracket will not sit right. Bushings are often the first part to crack on an older vehicle, so inspect them when the old unit comes out.
- Check both front shocks for leaks and seized mounts
- Inspect the upper and lower bushings before installation
- Replace front shocks in pairs for even steering feel
- Look for uneven tire wear that can follow worn dampers
Specifications
| Brand | Bilstein |
|---|---|
| Part number | B46-0046 |
| Shock series | 4600 Series |
| Position | Front |
| Shock type | Monotube, gas-charged |
| Bushings | Rubber |
| Boot | Blue, included |
| Sold as | Single shock |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1977–1983 Jeep Cherokee (SJ) and Wagoneer (SJ), the 1984–1991 Jeep Grand Wagoneer (SJ), and the 1975–1988 Jeep J10 and J20 pickups.
The list does not include the Jeep XJ Cherokee, the ZJ Grand Cherokee or the later Wrangler models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front shock absorber with a blue boot. The bushings are rubber and are part of the shock.









