Overview
The Bilstein 4600 Series Shock Absorber, part number 24-016186, is a gas-charged monotube shock for the rear position, with a 2 in body diameter and boots included. It is a direct fit design. Confirm fit for your vehicle’s year, model and trim before ordering.
Monotube gas-charged shocks keep oil and gas pressure in one tube, separated by a dividing piston. As the oil heats up, the piston lets it expand, which helps prevent foaming and loss of viscosity. Damping stays closer to its intended level when temperatures rise. Heat moves through the tube wall to the outer surface, where it dissipates, supporting heat management and shock life.
Key features
- Gas-charged monotube body with a 2 in body diameter
- Dividing piston allows oil expansion as heat builds
- Tube formed by a special extrusion method with tight peak-to-valley tolerance
- Consistent wall thickness and seamless monotube construction for tube strength
- Compression and rebound damping can be tuned independently
- Digressive piston design with fewer parts than most twin-tube designs
- Boots included
Rear damper service life
A rear shock works hardest when the axle rises and falls over ruts, and when the vehicle is loaded or towing. Over time the damping oil thins with heat and use, and the seals can wear, which reduces control. A shock that has lost its damping may feel fine on a smooth road but pitch and wander on washboard surfaces.
Gas-charged monotube shocks handle heat better than many older designs, but they still benefit from periodic inspection. After long descents, let the body cool before judging how the shock feels. Keep the rubber boot in good shape, since dirt on the rod can wear the seal. When you replace one rear shock, consider the other side at the same time so both respond the same way.
- Rod surface free of pitting
- Boot intact and not torn
- Oil on the outside of the body
- Matching rear shocks on both sides
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-016186 |
| UPC | 651860612720 |
| Series | 4600 Series |
| Position | Rear |
| Type | Monotube |
| Hydraulic / gas charged | Gas Charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Lift / drop | 0 in |
| Fitment type | Direct Fit |
Vehicle fitment
This rear shock is a direct fit design for the rear position, so match that position against your vehicle’s rear suspension before buying. Use part number 24-016186 when comparing it with your current shock.
Check fit against your rear suspension before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Boots are included. Check the package contents against your installation before starting. This design has no remote reservoir.









