Overview
The Bilstein 5100 Series shock absorber, part number 24-064576, is a monotube gas-charged shock for the 1987–1995 Jeep Wrangler (YJ). It has a stem upper mount and a 12.7mm eye lower mount, with a 14mm shaft, and its collapsed length is 16.97 in. with an extended length of 28.44 in.
Bilstein presents the 5100 Series for lifted trucks, Jeeps and prerunners. The company says its single tube, high gas pressure design gives consistent fade-free performance and long life. The 46mm smooth body is a non-coilover layout with no external reservoir, and a boot is included.
Key features
- Monotube gas pressure body with a 46mm smooth finish
- Self-adjusting deflecting disc valving
- High-flow piston for less harshness
- Independent rebound and compression tuning
- Larger working piston area for exact damping control
- Built for large diameter tires.
- Zinc plated finish
Choosing a replacement shock
A shock absorber controls how quickly the spring and body move after a bump or dip. On a Wrangler YJ, worn shocks often show up as extra bounce on washboard roads, nose dive under braking, or a tire that seems to lose contact on uneven ground. Because the YJ is a high-center vehicle, the travel and mounting angles of a shock matter as much as its damping feel when choosing a replacement.
When comparing options, look at the mount styles, the collapsed and extended lengths, and whether the body is smooth or has a reservoir. Replace shocks in pairs on the same axle so both sides damp the same way. Many owners also check bushings, bolts and bump stops at the same time, since worn hardware can mimic a bad shock.
- Check for oil seepage along the body
- Inspect eye and stem bushings for cracking
- Replace pairs on the same axle
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-064576 |
| UPC | 651860453811 |
| Series | 5100 Series |
| Collapsed length | 16.97 in. |
| Extended length | 28.44 in. |
| Travel length | 11.47 in. |
| Lower mount | Eye, 12.7mm |
| Upper mount | Stem |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body, non-coilover |
| Internal design | Monotube |
| Reservoir | No |
| Finish | Zinc plated |
| Charge | Gas charged |
| Boot included | Yes |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ) in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
Other Wrangler generations (TJ, LJ, JK, JL), the Cherokee and the Grand Cherokee are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock with its boot, from the Bilstein 5100 Series.












