Overview
The Bilstein 33-256740 is a B6 4600 Series rear shock absorber for the 2014 Ford F-150. It is a direct fit upgrade to the original shock absorbers on stock height light trucks and SUVs, with a monotube design and a 46mm smooth body.
The B6 4600 uses a velocity sensitive, digressive piston that responds to changing road conditions, and each shock is tuned for its specific application. The monotube layout gives steady damping without fade. The unit has a yellow paint finish, no reservoir and includes a boot. It fits the 2014 F-150 in the FX4, King Ranch, Lariat, Limited, Platinum, STX, XL and XLT trims.
Key features
- Direct fit upgrade to OE shock absorbers
- Velocity sensitive, digressive piston
- Monotube design that Bilstein describes as fade free
- Built for stock height trucks and SUVs
- 46mm ID smooth body, non-coilover
- Yellow paint finish, boot included
Before you swap rear shocks
Rear shocks on a stock height truck control body motion over bumps and during braking, and a worn set often shows as a bouncy ride or a rear end that keeps moving after a dip. Replacing them with a direct fit unit restores that control without changing the truck’s height. Work on a level surface, and make sure the replacement matches the original mounting style before loosening anything.
After installation, cycle the suspension by hand to check for smooth movement, and look over the boot and body for damage during the first drive. Rear springs, bump stops and bushings are common companions to shock work on a truck that has covered many miles, so inspect them while the wheels are off.
- Confirm the mounting style matches the original shock
- Check the boot for tears before installing
- Inspect bump stops during the same job
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-256740 |
| UPC | 700007952611 |
| Product line | B6 4600 Series |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | w/0 in. Lift/Drop |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Reservoir | No |
| Finish | Yellow paint |
| Boot | Included |
Vehicle fitment
It fits the 2014 Ford F-150 in the FX4, King Ranch, Lariat, Limited, Platinum, STX, XL and XLT trims. It is a stock height fit.
Confirm your vehicle’s year, model and trim before ordering, since this fit covers the 2014 F-150 only.
Installation notes
This is a direct fit upgrade meant to replace the original rear shocks on a stock height truck rather than a lifted one. Check your truck’s ride height before fitting it. Support the truck securely before removing the original shocks.
What’s included
One B6 4600 Series rear shock absorber with its boot.









