Overview
The Bilstein 46mm Monotube Shock Absorber, part number 24-026758, is a heavy duty rear gas charged shock in the 4600 Series, finished in yellow. Its UPC is 651860624754, and the previous part numbers BILF4-BE5-2675-H0 and BILF4-BE5-2675-H2 also apply to this shock.
A monotube shock uses one pressure tube with the piston running inside, rather than a twin-tube layout with a separate reservoir. The gas charge helps keep the oil from foaming, and the dividing piston gives the oil room to expand when it heats, so damping holds up as the shock gets hot.
Shock absorbers manage how fast the suspension compresses and rebounds. Compression damping resists the wheel travelling up toward the body, and rebound damping resists the return. The piston valving can be tuned for each direction, which supports both comfort and control. This is a direct-fit rear position unit with a lift height of w/0 in. Lift/Drop.
Key features
- Heavy duty 46mm monotube body
- Gas charged monotube design with a dividing piston
- Seamless extruded tube, described by Bilstein as having tight peak-to-valley tolerance
- Piston valving tunable separately for compression and rebound
- Yellow finish
- Direct fit, rear position
Heavy duty rear shock basics
Heavy duty rear shocks are chosen for loaded trucks, towing and rough roads, where the damping must stay consistent as the shock heats. A gas-charged monotube design is often selected for this kind of use because the single tube keeps the oil and gas working together over long runs.
Rear shocks are usually replaced with the springs and bushings in mind. Worn bushings can make a new shock feel loose, and a mismatch in mounting style can cause the shock to bind. Replacing both rear shocks at the same time keeps the two sides balanced.
- Inspect rear bushings and mounting hardware
- Look for oil on the shock body as a sign of seal wear
- Replace shocks in pairs on the same axle
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-026758 |
| UPC | 651860624754 |
| Shock series | 4600 Series |
| Size | 46mm |
| Type | Monotube |
| Gas charged | Yes |
| Duty | Heavy duty |
| Finish | Yellow |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | w/0 in. Lift/Drop |
| Previous part numbers | BILF4-BE5-2675-H0, BILF4-BE5-2675-H2 |
Vehicle fitment
Fitment is not known for part number 24-026758, and no vehicle is named for it. Fitment is not confirmed for any year, make or model.
Compare the lift height of w/0 in. Lift/Drop with your vehicle’s setup. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting, including whether boots are needed for this shock.









