Overview
The Bilstein 24-139106 is a Bilstein 4600 Series gas charged monotube shock absorber with a 2 in body diameter, a yellow finish and boots included. The vehicles this part number fits are unknown here, so confirm the application before ordering.
The gas charged monotube sends heat from the oil through the shock body to the outside, where it cools more efficiently. A dividing piston lets the oil expand as temperatures rise, which helps prevent foaming and viscosity loss so damping holds steady as the shock heats up. This design has no external reservoir, which fits a monotube layout.
Key features
- Gas charged monotube body that carries heat from the oil to the shock surface.
- Dividing piston that lets the oil expand, guarding against aeration and thinning.
- Extruded tube formed for a tight peak-to-valley tolerance and consistent wall thickness.
- Seamless monotube construction for added tube strength.
- Piston head with separately tuned compression and rebound damping.
- Fewer parts than most conventional twin tube designs.
- Boots included.
Monotube design and heat
A monotube shock keeps the damping oil and gas in one tube, so heat has a direct path from the oil to the outer body. A shock that runs hot can lose damping quickly, which is why cooling matters on hard driving, long descents and rough trail use. The dividing piston allows the oil to expand as it heats, without foam forming inside the tube.
When choosing between a monotube and a twin tube, consider how the vehicle is used, the space in the wheel well and the mounting style. Gas charged shocks are pressurized, so the body should not be cut or heated. Before replacing, inspect the boots and the shaft for damage, since grit on the shaft can wear the seal.
- Dust boots intact and seated
- Shaft free of pitting
- Mounting eyes and studs in good condition
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-139106 |
| UPC | 651860583884 |
| Series | 4600 Series |
| Body diameter | 2 in |
| Type | Monotube |
| Charge | Gas charged |
| Finish | Yellow |
| Reservoir | No |
| Boots | Included |
Vehicle fitment
Application is not identified for this part number. Match the year, make, model and trim of your vehicle before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gas charged shocks are pressurized, so have a qualified shop handle removal and disposal instead of opening or heating the body. Confirm the mounting eye and stud dimensions match your application before fitting.
What’s included
One Bilstein 4600 Series shock absorber with boots included.









