Overview
The Bilstein 4600 Series rear shock, part number BIL24-017992, is a gas charged monotube shock with a 2 inch body diameter and boots included. It is a direct fit for the 1993 to 1998 Jeep Grand Cherokee ZJ in several trims, including Base, Laredo, Limited, SE and TSi.
Because the shock is a monotube, it has no external reservoir. Bilstein says its monotube gas pressure construction carries heat from the oil through the outer surface of the body, which keeps the shock working efficiently.
A dividing piston in the tube lets the oil expand as it warms, which prevents foaming and loss of viscosity. This keeps the full damping force available as temperatures climb, and the piston head allows compression and rebound to be tuned independently.
The tube is made by a special extrusion method for a tight peak-to-valley tolerance and consistent wall thickness. The seamless monotube design offers tube strength while maximizing heat dissipation.
Key features
- Rear position
- Gas charged monotube design
- 2 inch body diameter
- Boots included
- No external reservoir
- Yellow finish
- Dividing piston for stable oil volume
- Separate compression and rebound tuning
Rear shock wear signs
Rear shocks control how the axle settles after bumps and keep the tires in contact with the road. Because a monotube shock has no external reservoir, leaks show up as oil on the outer body rather than at a separate canister. A worn rear shock can cause rear end bounce, rattling over small bumps and a loose feel on uneven pavement.
Rear shocks are normally replaced as a pair so the rear end damps evenly. The boots protect the rod seal from dirt and road grime, and a torn boot is a common reason for early seal wear. When fitting, check the rear springs and mounts, and make sure the boot sits correctly before tightening the fasteners.
- Look for oil on the outer tube
- Check the boot for tears or gaps
- Inspect the mounting bushings
- Re-check fasteners after the first drive
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL24-017992 |
| Shock series | 4600 Series |
| Position | Rear |
| Shock type | Monotube, gas charged |
| Body diameter | 2 inch |
| Reservoir | None |
| Boots | Included |
| Finish | Yellow |
| Fitment | Direct fit |
Vehicle fitment
It fits 1993 to 1998 Jeep Grand Cherokee (ZJ) models in the 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims.
The list does not include the Grand Cherokee WJ or WK models, the Cherokee XJ, or the Wrangler. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear shocks are normally replaced as a pair. Check the length and mounts against the rear springs before installing, and make sure the boots are fitted so dirt does not reach the rod seal.
What’s included
The product is one rear monotube shock with boots, under part number BIL24-017992.









