Overview
The Bilstein 4600 Series 24-186049 is a rear gas charged monotube shock absorber for the 2003–2009 Toyota 4Runner in Limited, SR5 and Sport trims and the 2007–2009 Toyota FJ Cruiser in Base trim. It is a direct-fit replacement with a 0 in lift/drop rating, a 2 in body diameter and a zinc plated finish.
Heat management is the core of this design. The monotube body carries heat from the damping oil to the outer surface of the shock, where it disperses. A dividing piston gives the oil room to expand as it heats, limiting foaming and thinning so damping stays steady on long climbs or sustained highway driving.
Key features
- Gas charged monotube design that moves heat from the oil to the shock body
- Dividing piston accommodates oil expansion as the shock heats
- Tube produced by a special extrusion process with tight peak-to-valley tolerance
- Piston head tunable for compression and rebound damping forces
- Fewer parts than many twin tube and road sensing designs
- Dust boots included
Signs a rear shock is worn
Worn rear shocks usually show up as extra body motion after dips, a rolling feel in corners, or the rear end bouncing several times before settling. Look at the shock body for oil streaks, and check the mounts for play. Tire cupping along the rear tread can also point to a damper that is no longer controlling the tire.
On 4Runner and FJ Cruiser applications, rear shocks work hard on washboard and highway-speed road surfaces. Replacing a worn unit with a matching gas-charged monotube restores control without changing the ride height. Pair the replacement with a check of the bushings and bump stops, since those parts wear alongside the shock.
- Check rear mounts for play
- Look for oil streaks on the body
- Inspect bump stops for cracks
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186049 |
| UPC | 651860558691 |
| Series | 4600 Series |
| Position | Rear |
| Type | Monotube, gas charged |
| Body diameter | 2 in |
| Finish | Zinc Plated |
| Lift/drop | 0 in |
| Reservoir | No |
| Boots included | Yes |
| Fitment type | Direct Fit |
Vehicle fitment
Bilstein’s manufacturer fitment list covers the 2003–2009 Toyota 4Runner in Limited, SR5 and Sport trims, and the 2007–2009 Toyota FJ Cruiser in Base trim.
The list does not cover other 4Runner generations, FJ Cruiser model years before 2007, or other Toyota models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gas-charged shocks are pressurized, so keep the body away from heat sources and do not cut, drill or puncture the tube. Check that the position is rear and that it matches your vehicle before you begin removal.
What’s included
A rear shock absorber with dust boots. Check the package contents against your installation, and confirm whether mounting hardware is needed.









