Overview
The Bilstein 33-230320 is a 5125 Series monotube shock absorber built for custom applications, including vehicles that have no direct Bilstein fitment. It uses a high gas pressure monotube body and a 46mm piston with self-adjusting deflective disc valving.
The 5125 Series comes in several lengths and valve rates. Confirm the length and valve rate for this part number before fitting it to a build, and measure the travel your suspension needs.
Key features
- High gas pressure monotube design
- 46mm piston with self-adjusting deflective disc valving
- Industry standard 5/8 inch hourglass bushings
- Eye/eye or stem/eye mount styles across the series
- Made for custom suspension builds
Planning a custom build
Custom suspension builds start with the mounting points, not the shock. Measure the bracket spacing, the required shock length at ride height, and the full travel the suspension needs before choosing a model. Shocks with the same body size can still differ in length and valve rate, so compare those figures for each application.
Bushings and hardware are the next checks. Eye/eye and stem/eye mounts each work with different brackets, and a mismatch causes binding or early wear. Use bushings that fit the mount without slop, and keep spacers and washers in the same stack. Recheck fasteners after the first few drives, and inspect the bushings each time the suspension is serviced. Clean the shaft regularly and look for seepage around the seal, which signals wear.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-230320 |
| UPC | 4025258726270 |
| Shock series | 5125 Series |
| Charge | Gas charged |
| Body design | Monotube, high gas pressure |
| Piston | 46mm |
| Valving | Self-adjusting deflective disc |
| Bushings | 5/8 inch hourglass |
| Mount style | Eye/eye or stem/eye; confirm the mount style before ordering |
| Fitment label | Universal Fit |
Vehicle fitment
Fitment is labeled Universal Fit, and the manufacturer fitment list has no vehicle entries for part number 33-230320. No year, make, model or chassis code is given, so the match depends on your mounting points and required length.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your existing mounting points and the required shock length before ordering, since neither is given for this number. The bushings are 5/8 inch, so confirm your mounting hardware accepts that size.
What’s included
Each shock comes with its 5/8 inch hourglass bushings. Brackets, hardware and spacers are not included, so plan your mounts before installing.









