Overview
The Bilstein 4600 Series Shock Absorber, part number 24-185097, is a rear gas-charged monotube shock with a 2 in body diameter. It is a direct-fit unit for the 1987–1995 Nissan Pathfinder in E, LE, SE and XE trims.
In a monotube design, one pressure tube holds the piston and the oil, with no separate outer reserve tube. Bilstein says its gas-charged body moves heat from the damping oil into the outer shock body, where it dissipates. A dividing piston lets the oil expand as temperatures climb, which the company credits with preventing foaming and viscosity loss.
The tube is seamless and formed by a special extrusion process, with tight peak-to-valley tolerance and consistent wall thickness. The piston head tunes compression and rebound damping separately for ride comfort.
Key features
- Gas-charged monotube body that carries heat from the oil to the outer shock tube.
- Dividing piston that accommodates oil expansion as heat builds.
- Seamless tube made by a special extrusion method for consistent wall thickness.
- Piston head with separately tuned compression and rebound damping.
- Boots included with the unit.
- Yellow finish from the 4600 Series line.
Care for an older rear axle
Older rear axles often show wear in the bushings and shock mounts before the shock body itself fails. When a shock is replaced, look at both ends of the unit for cracked rubber, loose fasteners or rust on the eyelets. A new monotube shock will not perform well if the mounts it bolts to have play in them.
Gas-charged monotube shocks tend to run warmer than simple designs after long drives, so let the body cool before removing it. Compare the rear ride height on both sides of the vehicle, since uneven height can point to a worn spring or a shock that has lost damping.
- Inspect bushings at both ends
- Check the body seal for leaks
- Compare rear ride height side to side
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-185097 |
| UPC | 651860407425 |
| Shock series | 4600 Series |
| Position | Rear |
| Fitment type | Direct fit |
| Body diameter | 2 in |
| Type | Monotube |
| Hydraulic / gas charged | Gas charged |
| Reservoir | No |
| Lift height | 0 in. lift/drop |
| Finish | Yellow |
| Boots included | Yes |
Vehicle fitment
The manufacturer fitment list covers the 1987–1995 Nissan Pathfinder in the E, LE, SE and XE trims. This is a rear-position shock, so it matches the rear suspension on those models only.
Not covered by this list: later Pathfinder generations and other Nissan models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift height is 0 in. lift/drop, so this is a no-lift replacement and does not add height to a lifted setup. Monotube shocks have no external reservoir.
What’s included
One shock absorber with boots included. Check whether mounting hardware and bushings are needed before starting the installation.









