Overview
The Bilstein 46mm Monotube Shock Absorber, part number 24-025683, is a heavy-duty gas-charged monotube shock for 1988–2000 Chevrolet and GMC K2500 and K3500 trucks. It fits the Chevrolet K2500 in Base, Cheyenne, LS, Scottsdale, Silverado and WT trims, and the GMC K2500 and K3500 in Sierra, Sierra SL, SLE, SLT and SLX trims.
Because it is labeled heavy duty, the design focuses on keeping damping steady when the shock runs hot over long stretches. Bilstein’s monotube layout moves heat out of the hydraulic oil through the outer shock body, and the dividing piston lets that oil swell as it warms, which holds back foaming and keeps damping from falling off. The valving can be tuned separately for compression and rebound, so the truck stays settled over ruts and washboard.
Bilstein lists BILF4-BE5-2568-H0 as the previous part number, so owners searching for that older number can match it to this 24-025683 shock.
Key features
- Heavy-duty 46mm monotube construction
- Gas-charged body for steadier damping as heat builds
- Dividing piston lets the oil expand without aeration
- Compression and rebound damping tunable independently
- Fewer internal parts than conventional twin-tube designs
- Yellow finish
Before you buy
Heavy-duty trucks put a lot of load on shock absorbers, especially when towing or running rough service roads. A monotube shock with a gas charge is built to hold damping steady as the unit heats up, which matters most on long grades or repeated bumps.
Before ordering, match the shock to the truck’s year, model and trim and confirm the mounting points against the unit you are removing. Shocks are often replaced in pairs on the same axle so both sides damp evenly, and worn bushings or mounts are worth replacing at the same time.
- Check both sides of the same axle for wear
- Inspect bushings and mounting hardware before installing
- Look for fluid leaks or a clunking feel as signs of a worn shock
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-025683 |
| Previous part number | BILF4-BE5-2568-H0 |
| UPC | 651860454078 |
| Shock series | 4600 Series |
| Size | 46mm |
| Type | Monotube |
| Hydraulic / gas charged | Gas charged |
| Fitment type | Direct fit |
| Finish | Yellow |
Vehicle fitment
It fits 1988–1999 Chevrolet K2500, 1988–2000 Chevrolet K3500, 1988–1999 GMC K2500 and 1988–2000 GMC K3500 trucks, in the trims listed above.
Years and models outside these ranges, including 2001 and newer K2500 and K3500 trucks, are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One heavy-duty 46mm monotube shock absorber, part number 24-025683.
Not included: Mounting hardware is not included.









