Nissan Frontier parts
1998–2026 models · 157 parts in 99 categories
Slickrock 4x4 lists 157 parts that fit the 1998–2026 Nissan Frontier, across 99 categories. The biggest sections are 43 suspension; the most listed brands are Rancho, Curt Manufacturing and Rough Country. Pick a category below, or select your model year so every listing and product page on the site checks fitment for you.
Shop Frontier parts by category
Popular Frontier parts
-
Bump Stops
Timbren Active Off-Road Rear Bumpstops – ABSOSR
- Rear Active Off-Road bump stop for 2015–2016 Colorado, Canyon, Nissan Frontier and Toyota Tundra
- Progressive-rate action at the end of axle travel
- Natural rubber compound built for continued use after long off-road sessions
- Lifetime warranty and satisfaction guarantee
- Natural rubber compound with progressive-rate action
SKU: T/IABSOSR -
Overland Racks
Thule TracRac SR Truck Rack – 43001XT
- Thule TracRac SR sliding truck rack, part number THU43001XT
- Slides into different positions for loads of different sizes
- Load capacity of up to 1250 lbs
- Direct fit for compact pickups from 1994–2019, including Ford Ranger and Nissan Frontier
- Direct fit, with specific vehicles listed
SKU: THU43001XT -
-
-
Leveling Kits
Rough Country 2.5″ Nissan Leveling Strut (Aluminum) – 865
- 2.5 inch front leveling strut extension in aluminum
- Fits 2005–2026 Nissan Frontier and 2005–2015 Nissan Xterra
- T6061 billet aluminum with black finish
- No strut disassembly needed for installation
- Not for PRO-4X models
SKU: R/C865 -
Disc Brake Rotors
Baer Brakes Claw Performance Rotors Rear 05-25 Nissan Frontier 2/4WD 05-15 Xterra And 09-12 Suzuki Equator 4/6Cyl – 31410-020
Disc Brake RotorsBaer Brakes Claw Performance Rotors Rear 05-25 Nissan Frontier 2/4WD 05-15 Xterra And 09-12 Suzuki Equator 4/6Cyl – 31410-020
- Fits the rear axle of the 2005-2025 Nissan Frontier, 2005-2015 Nissan Xterra and 2009-2012 Suzuki Equator
- Part number 31410-020, Baer Brakes Claw performance rear rotors sold as a set
- Cross-drilled and slotted one-piece cast iron rotors with a zinc-plated finish
- 6 stud/lug holes, 114 bolt hole circle diameter, 286 outside diameter
- ABS tone ring not included
SKU: 31410-020-BKCZ -
Disc Brake Rotors
Baer Brakes Claw Performance Rotors Front 05-19 Nissan Frontier 2WD 6Cyl 20-25 2WD 05-25 4WD 05-15 Xterra And 09-12 Suzuki Equator 4.0L V6 – 31412-020
Disc Brake RotorsBaer Brakes Claw Performance Rotors Front 05-19 Nissan Frontier 2WD 6Cyl 20-25 2WD 05-25 4WD 05-15 Xterra And 09-12 Suzuki Equator 4.0L V6 – 31412-020
- Front rotor for Nissan Frontier, Nissan Pathfinder, Nissan Xterra and 2009-2012 Suzuki Equator (Baer Brakes 31412-020)
- Frontier entry limited to 6-cylinder models with 4WD or RWD; Xterra and Equator limited to 4WD
- Discard thickness 26, outside diameter 296, overall height 38
- 6 stud/lug holes on a 114 mounting bolt hole circle diameter
- Sold as a set, zinc-plated, cross-drilled and slotted
SKU: 31412-020-BKCZ -
-
Oil Filters
K&N Filter Wrench Off Oil Filter – HP-1010
- K&N Filter oil filter, part number HP-1010, canister style
- Fitment list includes Honda CR-V 2002–2018 and Honda Pilot 2004–2018
- Also lists Nissan Frontier 1998–2018 and Nissan Xterra 2000–2015
- Anti-drainback valve where applicable
SKU: K/NHP-1010 -
-
Truck Bed Tailgate Extension
AMP BedXTender HD SPORT – 74801-01A
- Fits Toyota Tacoma 1995–2015, Nissan Frontier 1998–2017 and other 1995–2017 pickups
- Flips out for up to 2 feet of enclosed cargo area with the tailgate open
- 6063 T6 aluminum alloy tubes with composite clam-shell uprights
- Silver or Black powder-coat finish; 3-year/36,000-mile warranty
SKU: AMP74801-01A -
Truck Bed Tailgate Extension Mount Kit
AMP BedXTender Compact L Bracket Kit – 74601-01A
- Fits Nissan Frontier 1998–2017, Toyota Pickup 1984–1995, Toyota T100 1993–1998, Tacoma 1995–2004 and Tundra 2000–2004 per the manufacturer list
- Part number 74601-01A, UPC 815410010095
- Black finish
- Patented rounded-rectangle tubes and torque-resistant composite uprights
- Made in the USA, 3-year/36,000-mile warranty
SKU: AMP74601-01A -
Truck Bed Rack
Thule Xsporter Pro Multi-Height Aluminum Truck Rack – 500XT
- Fits listed 1994 to 2018 Chevrolet, Dodge, Ford, GMC, Isuzu, Lincoln, Mazda, Mitsubishi, Nissan, Ram, Suzuki and Toyota pickups
- Custom adjustable bar height with AirTrip and WindDiffuser airflow features
- Four One-Key lock cylinders included for SecureLock
- Tool-free load stops included
- No cutting or drilling required; limited assembly
SKU: THU500XT -
-
-
Tonneau Cover
Truxedo ProX15 Premium Roll-Up Tonneau Cover – 1484101
- Fits the 2005–2021 Nissan Frontier, from the Desert Runner and LE trims through XE
- Part number TRX1484101: soft roll-up tonneau cover with manual operation
- 15 degree rails for a low, flush-mount look
- Rack compatible; rack and toolbox are not included
- No drilling required; made in the USA
SKU: TRX1484101 -
Tonneau Cover
TruXedo Edge Soft Roll Up Tonneau Cover – 884101
- Fits 2005–2021 Nissan Frontier and 2009–2012 Suzuki Equator per the manufacturer fitment list
- TruXedo Edge soft roll-up tonneau cover, part number TRX884101
- Inside mount with no-drill, clamp-on installation
- One-finger release on the driver’s side for full bed access
- Manual operation, direct fit, not rack or toolbox compatible
SKU: TRX884101 -
-
-
Tonneau Cover
BAKFlip MX4 Hard Folding Truck Tonneau Cover – 448507
- Listed fit: 2005–2021 Nissan Frontier and 2009–2012 Suzuki Equator
- Heavy-duty, all-season flush mount hard folding cover
- Matte-finished cab corner caps, clamps and elevator bolts
- Part number BKI448507 with an extended 5-year warranty
SKU: BKI448507 -
Tonneau Cover
BAKFlip MX4 Hard Folding Truck Tonneau Cover – 448506
- Direct fit for 2005–2021 Nissan Frontier (Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV) and 2009–2012 Suzuki Equator (Base, RMZ-4, Sport)
- Hard folding cover that drives closed, flipped up or folded
- Durable aluminum matte finish panels rated for up to 400 pounds of evenly distributed weight
- Automatic latching panels and a dual action tailgate seal
- Part number 448506; extended 3-year warranty
SKU: BKI448506 -
-
Tonneau Cover
BAK Revolver X2 Hard Roll Up Truck Tonneau Cover – 39506
- Fits Nissan Frontier 2005–2021 and Suzuki Equator 2009–2012
- BAK Industries hard roll-up tonneau cover, part number BKI39506
- Automatic rotational locking rails fitted to each side of the bed
- Composite locking blocks and marine-grade vinyl finish
- Manual operation; rack compatible, not toolbox compatible
SKU: BKI39506
Nissan Frontier parts by year
Each year opens the full catalog filtered to parts listed for that model year.
199836 parts199938 parts200044 parts200144 parts200242 parts200342 parts200441 parts200595 parts200699 parts2007101 parts200899 parts2009100 parts2010102 parts2011100 parts201296 parts201389 parts201494 parts201586 parts201688 parts201782 parts201870 parts201947 parts202021 parts202121 parts202211 parts202311 parts202411 parts202511 parts20269 parts






















