Overview
The Bilstein 4600 Series rear shock absorber, part number 24-186209, is a gas-charged monotube unit with a 2 in body diameter, yellow finish and boots included. It is a rear-position shock. Confirm fit for your vehicle’s year, model and trim before ordering.
Heat management is the central design goal of this shock. The gas-charged monotube moves oil heat out through the shock body, and the dividing piston absorbs oil expansion so the damper does not aerate or lose viscosity as it warms. The piston head offers separate compression and rebound tuning, and the extruded tube keeps a consistent wall for strength. The design uses fewer parts than many conventional twin-tube and road-sensing shocks. Use the part number, monotube type and rear position to confirm the match before choosing.
Key features
- Rear-position gas-charged monotube shock
- Oil heat conducted to the outer surface of the body
- Dividing piston that handles oil expansion without foaming
- Piston head with independent compression and rebound tuning
- Extruded seamless tube with consistent wall thickness
- Yellow finish with boots included
Before you buy
Rear shocks do most of their work when the axle cycles over bumps and when the vehicle rebounds after a dip. A monotube gas-charged body keeps the damping oil under pressure, which helps the valving respond the same way on a long downhill as it does on the first hill. When choosing a rear shock, match the mounting style and stroke to the axle position, and check that the boot and bushings are in good shape before fitting.
Shocks often wear in pairs, so inspect the other rear unit when you replace one. Look for oil residue on the body, a clunk at the bottom of travel, or a bouncy ride that continues after the vehicle settles. Replacing both rear shocks together keeps the damping balanced from side to side.
- Check the boot for cracks before installation
- Inspect bushings and mounting hardware for wear
- Replace in pairs when one unit is worn
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186209 |
| UPC | 651860583327 |
| Shock series | 4600 Series |
| Position | Rear |
| Type | Monotube |
| Charge | Gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots | Included |
| Fitment type | Direct fit |
| Lift/drop | 0 in. |
Vehicle fitment
This rear-position shock is a direct-fit design. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The specifications describe a direct-fit design, so compare the mounting points on the new shock with the unit it replaces before removing the old one. Because this is the rear position, confirm the orientation matches the rear location on your vehicle.
What’s included
Boots are included with the shock absorber.









