Overview
The Bilstein 4600 Series rear shock absorber, part number 24-065382, is a gas-charged monotube shock that fits the 1997–2004 Dodge Dakota. It is a direct-fit rear replacement with a 2-inch body diameter, a yellow finish, boots included and no reservoir.
Bilstein explains that its monotube gas-charged body moves heat out of the oil and into the outer shock surface, where it dissipates more efficiently. A dividing piston lets that oil expand as temperatures climb, which the company says prevents aeration (foaming) and loss of viscosity, so the shock keeps full damping as temperatures rise.
The tube is formed by a special extrusion method for a tight peak-to-valley tolerance and consistent wall thickness. The seamless monotube adds strength and aids heat dissipation, and the piston head can be tuned separately for compression and rebound, which supports ride comfort. The design uses fewer parts than many conventional twin tube and road sensing shocks.
Key features
- Gas-charged monotube body that transfers oil heat to the outer shock surface
- Dividing piston allows oil to expand as heat builds, limiting foaming and viscosity loss
- Seamless tube formed by a special extrusion method with a tight peak-to-valley tolerance
- Piston head with independently tuned compression and rebound damping
- Fewer parts than most conventional twin tube and road sensing shock designs
- Boots included
Rear shock wear signs
A rear shock on a pickup takes much of the rough road input, especially when the truck is loaded or driven over ruts, so wear shows up quickly. Signs include a rear end that bounces after speed bumps, a bounce that rolls through the bed when driving over dips, or uneven rear tire wear. Because the rear axle moves through a large stroke, a worn shock can also make the ride feel loose.
A monotube design keeps its oil cooler through the body, which helps damping stay steady on longer drives and trail use. When replacing, check the lower eye and upper mount for play and inspect any rubber bushings. Replacing both rear shocks together keeps the back of the truck level and predictable under load and braking.
- Check for oil leaking down the body
- Look for uneven rear tire wear
- Test by pushing down at each corner
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-065382 |
| UPC | 651860616346 |
| Shock series | 4600 Series |
| Position | Rear |
| Type | Monotube |
| Hydraulic / gas charged | Gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Lift / drop | 0 in. |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997–2004 Dodge Dakota in Base, R/T, SLT, SLT Plus, SXT, Sport and Sport Plus trims, in the rear position.
Dakota years after 2004 are not covered, and no other Dodge models fit this part. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
The Bilstein 4600 Series rear shock absorber with boots included.









