Overview
The Bilstein 8100 Series 25-316995 is a rear right piggyback reservoir shock for the 2018–2026 Jeep Wrangler (JL). It is a 60mm large bore direct-fit unit for lifted trucks and SUVs, with eyelet mounts at both ends.
The body is billet construction. The 60mm inside diameter increases oil volume, which helps control heat over long distances on rough road surfaces. The monotube design uses velocity sensitive digressive valving tuned for each application, and the 60mm piston adds comfort and control.
This part is the rear right piggyback type, which places the reservoir alongside the shock body rather than remote from it. Measure the rear space on your Wrangler before ordering, since the piggyback reservoir adds bulk. Check the clearance for the reservoir against the body and the wheel well before mounting. Valve settings are velocity sensitive and tuned for each application.
Key features
- Rear right position
- Piggyback reservoir arrangement
- 60mm large bore billet body
- Monotube design with velocity sensitive digressive valving
- Eyelet top and bottom mounts
Piggyback reservoir packaging
Piggyback packaging trades some space for a simpler layout. Because the reservoir rides beside the body, the assembly is wider than a standard rear damper, and the reservoir can sit close to the wheel and the spring perch. Before ordering, look at how much room sits between the body and the inner wheel well, and consider how mud and rock build-up will fill that gap.
A rear shock like this does much of its work under light throttle on bumpy roads, so the oil temperature climbs slowly and steadily. The larger oil volume helps with that load, but it does not replace good bushings or springs. When inspecting the old rear damper, check the reservoir for dents, the eyelets for play and any seepage at the reservoir cap.
- Check wheel well clearance at full bump
- Clean the reservoir after mud runs to spot leaks
- Replace the matching rear side at the same time
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-316995 |
| Shock series | 8100 Series |
| Position | Rear right |
| Shock type | Piggyback reservoir |
| Body diameter | 60mm |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018 through 2026 Jeep Wrangler (JL) in the rear right position.
Wranglers from before 2018, Gladiator models and the rear left position are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear right piggyback reservoir shock absorber.
Installation notes
Check the rear clearance for the piggyback reservoir before mounting, and confirm the right side before you order.










