Overview
The Bilstein 4600 Series shock absorber, part number 24-024198, is a rear gas-charged monotube shock for the 1992–1999 Chevrolet K2500 Suburban and GMC K2500 Suburban. Its patented monotube body carries heat from the oil into the outer surface of the shock, so damping holds up as the unit warms.
Inside, a dividing piston lets the oil expand as it heats, which Bilstein says prevents aeration, foaming and loss of viscosity. The tube is extruded to a tight peak-to-valley tolerance with consistent wall thickness, and the piston head allows compression and rebound damping to be tuned independently for ride comfort. Owners comparing shocks can check the part number and 2 in body diameter against the unit being replaced.
Key features
- Patented monotube gas-charged body that moves heat from the oil to the shock’s outer surface
- Dividing piston lets the oil expand as temperatures rise, aiming to prevent foaming
- Seamless tube made by a special extrusion method for tight tolerances and consistent wall thickness
- Piston head with independently tuned compression and rebound damping
- Fewer parts than most conventional twin tube and road sensing designs.
- Boots included with the 2 in body diameter shock
Rear shock replacement
The rear shocks on a full-size Suburban carry a heavy body and load, so they work hard on washboard roads, trailers and uneven pavement. A shock that has lost damping lets the rear end bounce after a bump, which can make braking and cornering feel loose. Because a monotube keeps its oil cooler under steady use, it holds damping better on long drives, but only while the gas charge and seals remain sound.
When swapping a rear shock, check the old unit’s boots and mounting eyes for cracks, rust or bushings that have hardened. Rear shocks are commonly replaced alongside worn bushings, mounts and springs, since those parts affect how well a new shock controls the axle. Inspect the bolts after the first few drives, and recheck them once the truck has settled under its normal load.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-024198 |
| UPC | 651860451213 |
| Shock series | 4600 Series |
| Position | Rear |
| Type | Monotube |
| Gas charged | Yes |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Fitment type | Direct fit |
| Lift/drop | 0 in. (no lift) |
Vehicle fitment
The manufacturer fitment list covers the 1992–1999 Chevrolet K2500 Suburban (Base, LS, LT, Silverado) and the 1992–1999 GMC K2500 Suburban (Base, SLE, SLT). Fitment is shown by these trims and is marked as direct fit.
The list does not include the K1500 Suburban or any other Suburban generation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the shock is marked direct fit, its mounting eyes should line up with the original rear shock. Measure the old unit’s eye-to-eye length before installing, since no installed length is given here.
What’s included
The rear shock absorber comes with its boots included.









