Overview
The Bilstein B6 4600 front shock, part number BIL24-323796, is a 46 mm smooth body monotube for 4WD Ford F-150 trucks. It has an OEM top mount and a bar pin bottom mount, a yellow finish, and is sold individually.
It fits the 2021 and 2022 Ford F-150 in King Ranch, Lariat, Limited, Platinum, XL and XLT trim. It is a direct fit upgrade for the original shocks on stock height light trucks and SUVs.
The monotube provides consistent, fade free performance, with a velocity sensitive digressive piston that responds to changes in the road surface. Each shock is tuned for its application for better ride quality, handling and comfort.
Key features
- Front position
- 46 mm smooth body design
- OEM top mount
- Bar pin bottom mount
- Monotube design with consistent performance
- Velocity sensitive digressive piston
- Yellow finish
Bar pin and axle fit
A bar pin bottom mount clamps the shock to a bracket through a pin and bolt, so the fit depends on the pin position and the bracket on the axle or control arm. Because pins and brackets are not interchangeable across all trucks, the lower end needs careful checking before installing. The OEM top mount keeps the shock in the factory upper position.
Before fitting, compare the bar pin spacing with the old shock and inspect the bracket for cracks or bent metal. Check the top mount bushing and any hardware at the frame, and replace worn pieces at the same time. Shocks on four-wheel drive trucks see heavy use off road, so inspect the mounts after rough trail runs.
- Measure pin spacing against the old shock
- Inspect bracket for cracks
- Check the OEM top mount bushing
- Replace the pair when one side wears
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL24-323796 |
| Shock series | 4600 Series |
| Position | Front |
| Shock type | Monotube, gas charged |
| Body diameter | 46 mm smooth body |
| Top mount | OEM |
| Bottom mount | Bar pin |
| Sold as | Individually |
| Fitment | Direct fit |
Vehicle fitment
It fits 2021–2026 Ford F-150 models in King Ranch, Lariat, Limited, Platinum, XL and XLT trim, in 4WD form.
The short text names 4WD models. The list does not include the F-150 from 2020 and earlier or from 2023 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bar pin bottom mount has to match the lower mount on your truck, so check it before installing. The OEM top mount keeps the shock in its factory location.
What’s included
The product is one front shock absorber under part number BIL24-323796, sold individually.









