Overview
The Bilstein 5100 Ride Height Adjustable Shock Absorber, part number 24-248129, is a front gas-charged shock for the 2015–2018 Ford F-150. Bilstein places it in the B8 5100 line, a ride height adjustable design for trucks that run added front lift, with a lift range of 0 to 2 in.
The B8 5100 uses gas pressure construction and vehicle specific ride tuning. Gas-charged shocks use a pressurized gas chamber to help damping stay steady when the shock works hard, which matters on rough roads and heavier tire setups. The design is intended to improve ride, handling, traction, stability and durability.
Key features
- Ride height adjustable design, with 0 to 2 in. of lift
- Gas pressure construction
- Vehicle specific ride tuning
- Front position within the 5100 line
- Direct fit to the 2015–2018 Ford F-150 trims named below
- Manufacturer-described gains in ride quality, handling and stability
Lift and front suspension care
A ride height adjustable shock works best when the front lift is set first and the rest of the suspension is matched to it. Adding front lift changes the angle of the control arms, the steering geometry and the load on the front tires, so the shock should be checked alongside those parts. Gas pressure damping helps the shock resist fade when the truck carries a load or tows over long grades.
Inspect the upper and lower mounts, bushings and bump stops when the front end is apart, since worn parts can make a new shock feel loose. Have the front alignment checked after any lift change, and look for uneven tire wear that may point to a steering or geometry issue. Keep the shock clean and check for oil on the body during routine service.
- Check upper and lower mount bushings
- Inspect bump stops for wear
- Recheck alignment after any height change
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-248129 |
| UPC | 651860776187 |
| Product line | B8 5100 (Ride Height Adjustable) |
| Position | Front |
| Fitment type | Direct Fit |
| Lift height | 0 – 2 in. lift |
| Construction | Gas charged (gas pressure) |
Vehicle fitment
It fits the 2015–2018 Ford F-150 in King Ranch, Lariat, Limited, Platinum, SSV, XL and XLT trims.
F-150 model years outside 2015–2018 and trims not named in the list are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front shock absorber. Check the package contents against your installation before starting, since the mounting hardware you need depends on the setup.












