Overview
The 33-230375 from Bilstein belongs to the 5125 Series of custom-application shocks. It uses a high gas pressure monotube body and a 46mm piston, and it targets vehicles outside Bilstein’s direct-fit lineup.
The 5125 Series comes in several lengths and valve rates. Confirm the length and valve rate for this number before deciding whether it suits your build.
Key features
- Monotube design with high gas pressure
- 46mm piston
- Self-adjusting deflective disc valving
- Hourglass bushings measuring 5/8 inch
- Eye/eye or stem/eye mount styles across the series
Measuring before you order
Measuring is the step most buyers skip, and it matters more for custom work than for bolt-on parts. Record the shock length at full extension and at full compression, along with the distance between mount centers. Those three numbers decide whether a shock will fit and how much travel it can use before the piston reaches the end of its stroke.
Think about the rest of the suspension too. A stiffer spring rate or taller lift changes the length a shock must cover, so the measurements should reflect the final build. Bushing and mount clearance should be checked after the suspension is fully loaded, not just on the bench.
- Measure at full extension and full compression
- Record mount center distance on both ends
- Check clearance with the suspension loaded
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-230375 |
| UPC | 651860727981 |
| Shock series | 5125 Series |
| Charge | Gas charged |
| Body design | Monotube, high gas pressure |
| Piston | 46mm |
| Valving | Self-adjusting deflective disc |
| Bushings | 5/8 inch hourglass |
| Mount style | Mount style is eye/eye or stem/eye across the series. Match the style to your brackets before ordering. |
| Fitment label | Universal Fit |
Vehicle fitment
The fitment label is Universal Fit, and the manufacturer fitment list has no vehicle for 33-230375. Confirm that the shock matches your measured dimensions instead of relying on a vehicle name.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the installed length and the travel your suspension needs before fitting. The 5/8 inch hourglass bushings must match the eyes or studs on your brackets.
What’s included
The shock arrives as one unit with 5/8 inch hourglass bushings. Make sure the bracket hardware is ready before starting the install.









