Overview
The Bilstein 24-186643 is a 5100 Series shock absorber with a clevis lower mount and a stem upper mount, built for lifted trucks, Jeeps and prerunners. Its short-travel body makes it a compact choice for applications where the Bilstein 5100 Series fits the lift.
The 46mm smooth body is non-coilover and uses a monotube design with no reservoir. It is built for lifted trucks, Jeeps and prerunners, with a single tube high gas pressure design intended for long life. It fits applications that use the stock O.E.M. mounting configuration.
Key features
- Monotube internal design with no reservoir
- Clevis lower mount and stem upper mount
- 46mm ID smooth body, non-coilover
- Zinc plated finish
- Boot included
- Shaft diameter of 11mm
Measuring before you buy
Before choosing a shock with a short stroke, measure the installed length of the current unit and compare it with the collapsed and extended figures on the specification. A compact shock leaves less room for suspension travel, so it suits controlled use better than rough terrain. Check how the shock sits at the current ride height, since a short body can bottom out sooner than a longer one.
Mount type matters as much as length. A clevis lower mount and a stem upper mount use different hardware and angles than eye mounts, so confirm the pin size, bushings and bracket layout before ordering. Keep the old shock until the new one is confirmed, and inspect the boot and the mounting bracket for wear while the old part is still off.
- Measure installed length of the current shock
- Compare clevis and stem mounts with existing hardware
- Inspect the boot and bracket before fitting
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186643 |
| UPC | 651860581262 |
| Shock series | 5100 Series |
| Lower mount | Clevis |
| Upper mount | Stem |
| Collapsed length | 12.54 in |
| Extended length | 16.3 in |
| Travel length | 3.76 in |
| Shaft diameter | 11mm |
| Reservoir | No |
| Finish | Zinc plated |
| Body | 46mm ID smooth body, non-coilover |
| Internal design | Monotube |
| Boot | Included |
| Fitment type | Direct fit |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering, then compare the mount types and length dimensions with your current shock.
Compare the mount types and length dimensions with your current shock, and confirm your vehicle’s year, model and trim before ordering.
Installation notes
The clevis lower and stem upper mounts differ from the eye mounts on 24-186636, so compare mount types with your existing shock before ordering.
What’s included
The package is one shock absorber with a boot. Check the hardware you need against your installation before starting.









